Brackets and mounts
3-Finger Robot Gripper
- Bounding box
- 68 × 68 × 139.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 24
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
A clean, industrial 3-finger robotic gripper CAD model, inspired by the Robotiq 3-finger gripper silhouette, engineered for 3D printing as separate mechanical parts. No sub-joints on the fingers—each of the three claws is a single, solid, slightly curved rigid piece with a wide gripping tip and a cylindrical hinge knuckle with a through-hole at the base. The main wrist body is a sturdy, rigid, chamfered octagonal-cylindrical hub with three matching clevis hinge brackets on top and zero wrist rotation. At the bottom of the wrist hub is a rigid mounting plate with three parallel cylindrical pipe sockets arranged in a triangle to attach to a three-pipe forearm frame. Matte dark grey engineering plastic, sharp mechanical edges, clean manifold topology, high precision, white studio background, orthographic-style clarity.
Parameters
| Name | Value | Range |
|---|---|---|
| Octagon hub radius across corners | 28 mm | 15 – 50 |
| Hub height | 40 mm | 15 – 100 |
| Edge chamfer | 2.5 mm | 0.5 – 6 |
| Mounting plate radius | 34 mm | 20 – 60 |
| Mounting plate thickness | 8 mm | 3 – 20 |
| Socket outer diameter | 14 mm | 6 – 30 |
| Socket bore diameter | 10.4 mm | 3 – 25 |
| Socket length | 18 mm | 5 – 50 |
| Socket triangle radius | 22 mm | 10 – 45 |
| Hinge axis radius from centre | 26 mm | 10 – 50 |
| Hinge axis height | 74 mm | 30 – 160 |
| Clevis plate thickness | 4 mm | 2 – 8 |
| Gap between clevis plates | 12.4 mm | 6 – 30 |
| Clevis plate radial length | 14 mm | 8 – 30 |
| Knuckle diameter | 14 mm | 6 – 30 |
| Knuckle length | 12 mm | 6 – 30 |
| Hinge pin diameter | 3.2 mm | 2 – 8 |
| Hinge hole diameter | 3.4 mm | 2 – 9 |
| Finger arm thickness | 12 mm | 4 – 30 |
| Finger arm length | 51 mm | 25 – 100 |
| Inward tip offset | 10 mm | 4 – 40 |
| Tip pad lean angle | 22 deg | 0 – 60 |
| Gripping tip width | 16 mm | 6 – 40 |
| Gripping tip height | 14 mm | 4 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
