Brackets and mounts
3-Blade Micro Drone Propeller
- Bounding box
- 25.3 × 27.2 × 4.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a high-precision 3D CAD model of a 3-blade micro drone propeller matching the Gemfan 1219S specification for 0702SE brushless motors (1.000 mm shaft), with exact dimensional accuracy to 0.001 mm. Dimensions and geometry: - Total propeller disk diameter: 31.000 mm (radius 15.500 mm). - Number of blades: 3, evenly spaced at 120.000 degrees around the Z-axis. - Direction of rotation: Clockwise (CW). - Center hub outer diameter: 4.200 mm. - Center hub height (thickness): 3.400 mm (matched for 4.200 mm motor shaft length with clearance). - Center shaft mounting bore: 1.000 mm diameter cylindrical through-hole along the Z-axis. Add a 0.250 mm x 45-degree entry chamfer at the bottom face for smooth press-fit onto a 1.000 mm motor shaft, and a 0.100 mm chamfer at the top face. - Blade pitch: constant geometric pitch of 48.260 mm (1.900 inches). - Blade root width (at hub connection): 3.200 mm. - Maximum blade chord width: 7.300 mm, located at 65% of the blade radius (10.075 mm from center). - Blade tip shape: rounded swept-back micro-whoop profile with a tip radius of 1.800 mm. - Airfoil cross-section: thin cambered micro-propeller airfoil, maximum thickness 0.650 mm near the root tapering smoothly to 0.280 mm near the tip, with rounded leading edge (radius 0.150 mm) and sharp trailing edge (0.100 mm thickness). - Blade root fillet: smooth 0.400 mm transition fillet between each blade and the outer wall of the center hub. Ensure clean manifold geometry, smooth lofted surfaces along the twisted blade profiles, and export-ready precision in millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Propeller disk diameter | 31 mm | 10 – 100 |
| Number of blades | 3 mm | 2 – 6 |
| Hub outer diameter | 4.2 mm | 2 – 10 |
| Hub height | 3.4 mm | 1 – 10 |
| Shaft bore diameter | 1 mm | 0.5 – 5 |
| Bottom bore chamfer | 0.25 mm | 0.01 – 2 |
| Top bore chamfer | 0.1 mm | 0.01 – 2 |
| Geometric pitch (mm/rev) | 48.26 mm | 5 – 100 |
| Blade root chord width | 3.2 mm | 1 – 10 |
| Maximum blade chord | 7.3 mm | 2 – 15 |
| Max chord radial position | 10.07 mm | 2 – 20 |
| Blade tip radius | 1.8 mm | 0.5 – 5 |
| Root airfoil thickness | 0.65 mm | 0.2 – 2 |
| Tip airfoil thickness | 0.28 mm | 0.1 – 1 |
| Trailing edge thickness | 0.1 mm | 0.05 – 0.5 |
| Blade root embed/fillet | 0.4 mm | 0 – 2 |
| Tip sweep-back | 1.5 mm | 0 – 5 |
| Blade dihedral lift | 0.8 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
