Enclosures and housings
2x2 Skincare Bottle Organizer
- Bounding box
- 94.0 × 94.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 3D-printable organizer base for 4 skincare bottles in a 2x2 grid. Units: mm. Export a single watertight STL. 1. Sketch a rounded square on XY, centered on origin: exactly 94 (X) x 94 (Y). All 4 corners have a 12 mm radius, tangent arcs. Extrude 25 mm up, bottom at Z=0. Do not add any extra width or margin. 2. Fillet the top and bottom outer edges at 2 mm, keeping the 12 mm corners. 3. Cut exactly 4 blind circular pockets, 34 mm diameter, 22 mm deep from the top face, flat bottoms, vertical walls. Centers at X = ±22 and Y = ±22 (44 mm center to center in both directions). Pockets must not change the outer size. 4. Fillet the top rim of ALL 4 pockets at 2 mm (4 of 4, none skipped). If a fillet fails, retry that pocket. Checklist before export: - Size is exactly 94 x 94 x 25 (neither side more than 94) - 4 corners rounded at 12 mm - Outer top and bottom edges filleted at 2 mm - 4 pockets, 34 mm diameter, 22 mm deep, 44 mm center to center, 10 mm wall between neighbors, 8 mm wall to the outer edge on all sides - Rim fillets: 4 of 4 Single solid body, flat bottom, no text. Do not change stated dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Size (X & Y) | 94 mm | 50 – 200 |
| Overall Height | 25 mm | 10 – 100 |
| Corner Radius | 12 mm | 1 – 30 |
| Outer Top/Bottom Fillet | 2 mm | 0.5 – 5 |
| Pocket Diameter | 34 mm | 10 – 80 |
| Pocket Depth | 22 mm | 5 – 40 |
| Pocket Center Offset (±X, ±Y) | 22 mm | 10 – 40 |
| Pocket Rim Fillet | 2 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no