Enclosures and housings
16x12x3 3-Sided Wall Box with Cover
- Bounding box
- 406.4 × 80.7 × 304.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
a open box with only 3 sides
Parameters
| Name | Value | Range |
|---|---|---|
| Outer width - 16 in | 406.4 mm | 100 – 600 |
| Outer height - 12 in | 304.8 mm | 100 – 600 |
| Outer depth - 3 in | 76.2 mm | 20 – 200 |
| Wall thickness | 4 mm | 1.6 – 8 |
| Vertical corner radius | 6 mm | 0 – 20 |
| 1 = closed top, 0 = open (3-sided) | 0 mm | 0 – 1 |
| 1 = closed bottom, 0 = open (3-sided) | 0 mm | 0 – 1 |
| Cover plate thickness | 5 mm | 2 – 12 |
| Register lip depth | 10 mm | 3 – 25 |
| Register lip rim width | 5 mm | 2 – 12 |
| Sliding fit clearance per side | 0.25 mm | 0.1 – 0.6 |
| Cover clearance hole dia M3=3.4 | 3.4 mm | 2.5 – 6 |
| Pilot hole dia for M3 screw | 2.6 mm | 1.5 – 5 |
| Corner post cross-section | 12 mm | 8 – 25 |
| Corner post length | 22 mm | 8 – 60 |
| Screw centre from outer edge | 10 mm | 6 – 25 |
| Pilot hole depth | 14 mm | 6 – 40 |
| Wall mounting hole dia M4=4.5 | 4.5 mm | 3 – 8 |
| Mounting hole inset from edge | 40 mm | 15 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,