Enclosures and housings
150cc Street Motorcycle Tyres - Front 110/70 R17 and Rear 140/60 R17
- Bounding box
- 600.0 × 600.0 × 140.2 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create two separate editable tyre-only CAD solids. Nominal size-derived diameters: front 585.8 mm and rear 599.8 mm, bead seat diameter 431.8 mm. Rounded radial cross-sections, hollow bead opening and repeated directional tread slots. No rim, hub or brake parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Rim bead-seat diameter | 431.8 mm | 425 – 440 |
| Front nominal outer diameter | 585.8 mm | 570 – 600 |
| Front section width | 110 mm | 100 – 120 |
| Rear nominal outer diameter | 599.8 mm | 585 – 615 |
| Rear section width | 140 mm | 130 – 150 |
| Bead/sidewall edge radial height | 13 mm | 9 – 18 |
| Bead transition axial length | 12 mm | 8 – 18 |
| Tread groove nominal depth | 5 mm | 2 – 8 |
| Tread groove width | 4 mm | 2 – 7 |
| Number of directional grooves | 24 count | 12 – 48 |
| Groove span fraction of half-width | 0.42 ratio | 0.25 – 0.6 |
| Directional groove skew fraction | 0.13 ratio | 0.05 – 0.2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no