Enclosures and housings
135-Degree Corner Strip
- Bounding box
- 330.7 × 12.3 × 211.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 1
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
reate a 3D printable part: a long straight corner strip with a V shaped cross section, to be glued into the inside corner between two flat walls that meet at 135 degrees. Units are millimetres. Cross section, drawn in the XY plane as one closed 6 point polygon with straight edges and no fillets. The points in order are: (0, 0) (18.48, 7.65) (16.57, 12.27) (0, 5.41) (-16.57, 12.27) (-18.48, 7.65) Extrude this profile 211.5 along the Z axis. Details: - The two outer faces, from (0,0) to (18.48, 7.65) and from (0,0) to (-18.48, 7.65), are the flat gluing faces. Each is 20 wide and the angle between them is 135 degrees. - Material thickness is 5 on each leg. - The ends of each leg are cut square to the leg. - The strip is solid, with no holes, screws, inserts or other features. - Overall bounding box is about 36.96 wide, 12.27 tall and 211.5 long. - Keep all edges sharp and the two gluing faces perfectly flat. - Export as STL. I need 8 identical copies.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 211.5 mm | 10 – 1000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,