Enclosures and housings
10-inch Screen Raspberry Pi Clamshell Case
- Bounding box
- 300.0 × 228.5 × 63.0 mm
- Engine
- Precision B-rep
- Parameters
- 46
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
I'm looking to laser cut a case for a custome machine. It needs to be able to contain a 10inch screen in the top part and a raspberry pi, keyboard, two power banks and a SD card reader in the bottom part (pi can be below keyboard) ultimate the two parts need to close to conceal and keep it all safe but when opened the top part can be used like a monitor.
Parameters
| Name | Value | Range |
|---|---|---|
| Case Width | 300 mm | 200 – 400 |
| Case Depth | 220 mm | 150 – 320 |
| Tray Height | 45 mm | 25 – 80 |
| Lid Height | 18 mm | 10 – 30 |
| Sheet Thickness | 3 mm | 2 – 6 |
| Front Latch Notch Width | 40 mm | 15 – 80 |
| Front Latch Notch Height | 8 mm | 3 – 20 |
| Screen Frame Width | 250 mm | 150 – 290 |
| Screen Frame Depth | 170 mm | 100 – 210 |
| Screen Frame Thickness | 6 mm | 3 – 10 |
| Display Aperture Width | 222 mm | 120 – 270 |
| Display Aperture Height | 125 mm | 80 – 180 |
| Lid Screen Pocket Width | 258 mm | 150 – 296 |
| Lid Screen Pocket Depth | 178 mm | 100 – 216 |
| Lid Pocket Depth | 15 mm | 5 – 25 |
| Screen Mount Tab Size | 16 mm | 8 – 30 |
| Tab Screw Hole Dia | 2.7 mm | 1.5 – 4 |
| Hinge Plate Width | 80 mm | 40 – 140 |
| Hinge Plate Height | 20 mm | 10 – 40 |
| Hinge Plate Thickness | 8 mm | 3 – 16 |
| Hinge Centre Spacing | 120 mm | 60 – 260 |
| Hinge Pin Diameter | 3 mm | 2 – 6 |
| Pi Plate Width | 90 mm | 60 – 140 |
| Pi Plate Depth | 60 mm | 40 – 110 |
| Pi Plate Thickness | 3 mm | 2 – 6 |
| Pi Plate Centre Y | 90 mm | 30 – 180 |
| Pi Hole Pitch X | 58 mm | 30 – 90 |
| Pi Hole Pitch Y | 49 mm | 25 – 80 |
| Pi Standoff Hole Dia | 2.7 mm | 2 – 4 |
| Keyboard Deck Width | 260 mm | 160 – 290 |
| Keyboard Deck Depth | 110 mm | 60 – 180 |
| Keyboard Deck Thickness | 5 mm | 3 – 10 |
| Deck Height Above Floor | 22 mm | 8 – 40 |
| Deck Front Edge Y | 20 mm | 3 – 100 |
| Keyboard Cutout Width | 236 mm | 120 – 270 |
| Keyboard Cutout Depth | 86 mm | 40 – 150 |
| Power Bank Bay Width | 110 mm | 60 – 140 |
| Power Bank Bay Depth | 65 mm | 40 – 100 |
| Bay Wall Height | 20 mm | 10 – 40 |
| Bay Rear Wall Gap | 15 mm | 3 – 60 |
| SD Bracket Leg Length | 30 mm | 15 – 60 |
| SD Bracket Leg Width | 20 mm | 10 – 40 |
| SD Bracket Upright Height | 10 mm | 5 – 25 |
| SD Module Slot Width | 20 mm | 8 – 35 |
| SD Module Slot Height | 4 mm | 2 – 12 |
| SD Bracket Position Y | 145 mm | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,