Brackets and mounts
10-inch 1U Network Switch Rack Shelf
- Bounding box
- 254.0 × 44.5 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 10-inch rack mount shelf for a network switch. The overall width of the panel must be exactly 254mm (standard 10-inch rack width) with a height of 1U (44.45mm). On the front face, create a rectangular opening measuring 162mm wide and 31mm high to tightly fit a switch chassis that is 160mm wide and 29mm tall. Include standard vertical slot mounting holes on the left and right rack ears spaced 183mm apart center-to-center. Make the wall thickness 3mm for 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel Width | 254 mm | 100 – 500 |
| Panel Height (1U) | 44.45 mm | 20 – 100 |
| Wall Thickness | 3 mm | 1 – 10 |
| Switch Opening Width | 162 mm | 100 – 200 |
| Switch Opening Height | 31 mm | 20 – 40 |
| Mounting Slot Spacing | 183 mm | 100 – 250 |
| Mounting Slot Length | 9 mm | 5 – 20 |
| Mounting Slot Width | 5.5 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl