Enclosures and housings
10-Finger Nail Guide Set
- Bounding box
- 45.2 × 57.5 × 0.5 mm
- Engine
- Precision B-rep
- Parameters
- 62
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Design a thin die-cut adhesive nail shaping guide based on the attached reference photo. The product is only the white portion, not the blue pen lines. It should have an almond-shaped outer perimeter with smooth, symmetrical curves and a rounded tip. The center should be a long, narrow U-shaped cutout that starts near the top and extends almost to the bottom, leaving a thin, consistent white border around the opening. The bottom should have a shallow curved opening that follows the natural smile line of a nail. The sticker should resemble a French-tip guide rather than a full nail cover, exposing most of the nail underneath. Make the design perfectly symmetrical, with clean vector-quality curves suitable for die-cut manufacturing. Generate a complete size set for all 10 fingers (thumb, index, middle, ring, and pinky for both hands), scaling each proportionally while maintaining the exact same shape.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap (X spacing) | 5 mm | 1 – 20 |
| Material Thickness | 0.5 mm | 0.1 – 2 |
| Left Thumb Outer Width | 30 mm | 10 – 50 |
| Left Thumb Outer Height | 18 mm | 10 – 50 |
| Left Thumb Slot Width | 26 mm | 5 – 45 |
| Left Thumb Slot Height | 14 mm | 5 – 45 |
| Left Thumb Smile Chord | 10 mm | 1 – 25 |
| Left Thumb Smile Rise | 2 mm | 0.1 – 10 |
| Left Index Outer Width | 25.2 mm | 10 – 50 |
| Left Index Outer Height | 15.1 mm | 10 – 50 |
| Left Index Slot Width | 21.8 mm | 5 – 45 |
| Left Index Slot Height | 11.8 mm | 5 – 45 |
| Left Index Smile Chord | 8.4 mm | 1 – 25 |
| Left Index Smile Rise | 1.7 mm | 0.1 – 10 |
| Left Middle Outer Width | 27 mm | 10 – 50 |
| Left Middle Outer Height | 16.2 mm | 10 – 50 |
| Left Middle Slot Width | 23.4 mm | 5 – 45 |
| Left Middle Slot Height | 12.6 mm | 5 – 45 |
| Left Middle Smile Chord | 9 mm | 1 – 25 |
| Left Middle Smile Rise | 1.8 mm | 0.1 – 10 |
| Left Ring Outer Width | 24.6 mm | 10 – 50 |
| Left Ring Outer Height | 14.8 mm | 10 – 50 |
| Left Ring Slot Width | 21.3 mm | 5 – 45 |
| Left Ring Slot Height | 11.5 mm | 5 – 45 |
| Left Ring Smile Chord | 8.2 mm | 1 – 25 |
| Left Ring Smile Rise | 1.6 mm | 0.1 – 10 |
| Left Pinky Outer Width | 20.4 mm | 10 – 50 |
| Left Pinky Outer Height | 12.2 mm | 10 – 50 |
| Left Pinky Slot Width | 17.7 mm | 5 – 45 |
| Left Pinky Slot Height | 9.5 mm | 5 – 45 |
| Left Pinky Smile Chord | 6.8 mm | 1 – 25 |
| Left Pinky Smile Rise | 1.4 mm | 0.1 – 10 |
| Right Thumb Outer Width | 30 mm | 10 – 50 |
| Right Thumb Outer Height | 18 mm | 10 – 50 |
| Right Thumb Slot Width | 26 mm | 5 – 45 |
| Right Thumb Slot Height | 14 mm | 5 – 45 |
| Right Thumb Smile Chord | 10 mm | 1 – 25 |
| Right Thumb Smile Rise | 2 mm | 0.1 – 10 |
| Right Index Outer Width | 25.2 mm | 10 – 50 |
| Right Index Outer Height | 15.1 mm | 10 – 50 |
| Right Index Slot Width | 21.8 mm | 5 – 45 |
| Right Index Slot Height | 11.8 mm | 5 – 45 |
| Right Index Smile Chord | 8.4 mm | 1 – 25 |
| Right Index Smile Rise | 1.7 mm | 0.1 – 10 |
| Right Middle Outer Width | 27 mm | 10 – 50 |
| Right Middle Outer Height | 16.2 mm | 10 – 50 |
| Right Middle Slot Width | 23.4 mm | 5 – 45 |
| Right Middle Slot Height | 12.6 mm | 5 – 45 |
| Right Middle Smile Chord | 9 mm | 1 – 25 |
| Right Middle Smile Rise | 1.8 mm | 0.1 – 10 |
| Right Ring Outer Width | 24.6 mm | 10 – 50 |
| Right Ring Outer Height | 14.8 mm | 10 – 50 |
| Right Ring Slot Width | 21.3 mm | 5 – 45 |
| Right Ring Slot Height | 11.5 mm | 5 – 45 |
| Right Ring Smile Chord | 8.2 mm | 1 – 25 |
| Right Ring Smile Rise | 1.6 mm | 0.1 – 10 |
| Right Pinky Outer Width | 20.4 mm | 10 – 50 |
| Right Pinky Outer Height | 12.2 mm | 10 – 50 |
| Right Pinky Slot Width | 17.7 mm | 5 – 45 |
| Right Pinky Slot Height | 9.5 mm | 5 – 45 |
| Right Pinky Smile Chord | 6.8 mm | 1 – 25 |
| Right Pinky Smile Rise | 1.4 mm | 0.1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox