Mechanical parts
1 Liter Bottle with Screw Cap
- Bounding box
- 80 × 80.4 × 275 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 1 liter bottle with a screw cap, with the corresponding text printed next to it.
Parameters
| Name | Value | Range |
|---|---|---|
| Body diameter | 80 mm | 50 – 120 |
| Straight body height | 195 mm | 100 – 300 |
| Shoulder height | 60 mm | 25 – 120 |
| Bottle wall thickness | 2.2 mm | 1.2 – 4 |
| Neck outer diameter | 30 mm | 20 – 44 |
| Neck height | 17 mm | 8 – 30 |
| Cap height | 21 mm | 12 – 30 |
| Cap wall thickness | 3.2 mm | 1.6 – 6 |
| Cap-to-neck running clearance | 0.4 mm | 0.2 – 1 |
| Thread pitch | 3.5 mm | 1.5 – 6 |
| Thread profile diameter | 2.2 mm | 1.2 – 4 |
| Letter height | 24 mm | 8 – 40 |
| Emboss depth | 0.8 mm | 0.6 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Frame Drone 5 inch Stretched X (1503, FC 30.5, TOF, Arm Polos)
Frame drone 5 inch stretched X persegi panjang, motor 1503 3 baut, ujung arm bentuk X polos tanpa cekungan, FC 30.5, spacer, lubang TOF
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
