Brackets and mounts
Y3-Tricopter QuadPlane VTOL UAV (Preliminary)
- Bounding box
- 1209.5 × 1410.0 × 432.1 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create an editable 3D CAD model of a Y3-Tricopter QuadPlane VTOL UAV. Use millimeters. Dimensions: - Wingspan: 1410 mm. - Wing chord: 220 mm. - Fuselage: 425 × 110 × 100 mm. - Horizontal tail span: 500 mm. - Vertical fin height: 260 mm. - Two rear aluminum tubes: diameter 16 mm, spacing 60 mm, extending 500 mm behind the fuselage. Configuration: - High straight rectangular wing, no sweep or taper. - Separate nose tractor motor. - Two vertical-lift motors on forward-projecting tubes near the wing. - One rear lift motor on an adjustable carriage fixed to the two rear tubes. - Rear motor mount pivots ±15 degrees using a servo. - Conventional tail with elevator and rudder. - Separate editable parts, not one merged solid. - Propeller diameter: 254 mm. Create solid CAD geometry, not just a picture. Use adjustable parameters for unknown dimensions. Check component collisions and propeller clearance. Export STEP files if supported. This is a preliminary design, not a flight-validated aircraft.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage Length | 425 mm | 200 – 800 |
| Fuselage Width | 110 mm | 50 – 300 |
| Fuselage Height | 100 mm | 40 – 300 |
| Wing Span | 1410 mm | 500 – 3000 |
| Wing Chord | 220 mm | 100 – 600 |
| Wing Thickness | 30 mm | 10 – 100 |
| Wing Center X | -30 mm | -200 – 200 |
| Wing Center Z | 60 mm | 0 – 300 |
| Tail Span | 500 mm | 200 – 1500 |
| Tail Chord | 120 mm | 50 – 400 |
| Tail Thickness | 15 mm | 5 – 50 |
| Tail Center X | -262.5 mm | -500 – 0 |
| Tail Center Z | 30 mm | -50 – 200 |
| Fin Height | 260 mm | 100 – 600 |
| Fin Chord | 140 mm | 50 – 400 |
| Fin Thickness | 15 mm | 5 – 50 |
| Fin Center X | -250 mm | -500 – 0 |
| Fin Base Z | 45 mm | 0 – 200 |
| Rear Tube Diameter | 16 mm | 5 – 50 |
| Rear Tube Length | 500 mm | 100 – 1500 |
| Rear Tube Spacing | 60 mm | 20 – 300 |
| Rear Tube Z | 0 mm | -100 – 100 |
| Motor Diameter | 40 mm | 10 – 150 |
| Motor Length | 50 mm | 10 – 200 |
| Propeller Diameter | 254 mm | 50 – 800 |
| Propeller Thickness | 4 mm | 1 – 20 |
| Forward Boom Length | 300 mm | 50 – 1000 |
| Forward Boom Diameter | 25 mm | 5 – 100 |
| Forward Boom Y Offset | 60 mm | 0 – 500 |
| Forward Boom Z | 40 mm | -100 – 200 |
| Carriage Length | 80 mm | 20 – 300 |
| Carriage Width | 80 mm | 20 – 300 |
| Carriage Height | 40 mm | 10 – 200 |
| Carriage X Position | -400 mm | -1000 – 0 |
| Pivot Length | 60 mm | 20 – 200 |
| Pivot Width | 60 mm | 20 – 200 |
| Pivot Height | 50 mm | 10 – 200 |
| Pivot X Position | -420 mm | -1000 – 0 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu