Gears and transmission
XYZ Axes with Central Spur Gear
- Bounding box
- 240.0 × 240.0 × 240.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create three axes, labeled XYZ, each with a different color; each is at a 90-degree angle to the others. At the origin, where the three axes intersect, there should be gears that can retract two vertices to one at the center.
Parameters
| Name | Value | Range |
|---|---|---|
| X Axis Diameter | 6 mm | 2 – 20 |
| Y Axis Diameter | 8 mm | 2 – 20 |
| Z Axis Diameter | 10 mm | 2 – 20 |
| Axis Length | 120 mm | 40 – 300 |
| Gear Module | 2 mm | 0.5 – 5 |
| Gear Teeth | 20 | 8 – 60 |
| Gear Width | 10 mm | 4 – 30 |
| Gear Bore Diameter | 10 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled