Brackets and mounts
xTool F1 Ultra Conveyor Guide Assembly
- Bounding box
- 440.0 × 120.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
A highly accurate, industrial mechanical 3D model of a manufacturing guide assembly for the xTool F1 Ultra conveyor, split into two separate components. Component 1 (Static Guide Bracket): A rigid mounting chassis designed to bolt directly onto the stationary metal side rails of a conveyor system. The design must bridge over a moving belt with a clear 1.5mm vertical clearance underneath. The bottom faces that rest on the non-moving metal frame must feature four precise, recessed rectangular pockets to tightly insert rubber dampening pads. The main channel forms a smooth, parallel guide fence to funnel materials perfectly straight down the tracking path. Component 2 (High-Contrast Sled): A square carrier template with a total outer width of 120.0mm. The main base plate is exactly 2.0mm thick and features a clean 96.0mm circular hole cut completely through the dead center. Rising upward from the top face of this base plate is a vertical retaining wall that is exactly 1.2mm thick and extends 6.0mm high, creating a tight bounding perimeter around the inner circular cutout. All surfaces must be perfectly flat, geometric, and optimized for 3D printing without overhangs.
Parameters
| Name | Value | Range |
|---|---|---|
| Bracket length | 280 mm | 200 – 400 |
| Bracket width | 120 mm | 120 – 200 |
| Bracket height | 25 mm | 15 – 40 |
| Belt clearance height | 1.5 mm | 0.5 – 5 |
| Bottom clearance channel width | 80 mm | 40 – 90 |
| Top guide fence groove width | 90 mm | 40 – 95 |
| Top guide fence groove depth | 5 mm | 1 – 12 |
| Rubber pad pocket length | 18 mm | 8 – 30 |
| Rubber pad pocket width | 10 mm | 5 – 12 |
| Rubber pad pocket depth | 2 mm | 0.5 – 4 |
| Pad pocket end inset | 30 mm | 5 – 80 |
| Pad pocket side inset | 5 mm | 2 – 8 |
| Sled outer width | 120 mm | 100 – 200 |
| Sled base plate thickness | 2 mm | 1 – 4 |
| Sled central hole diameter | 96 mm | 60 – 110 |
| Sled retaining wall thickness | 1.2 mm | 0.8 – 3 |
| Sled retaining wall height | 6 mm | 3 – 10 |
| Exploded layout gap | 40 mm | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent