Loading the interactive model…
Interactive 3D model of XIAO ESP32S3 Sense Camera & AA Battery CaseEverything else
XIAO ESP32S3 Sense Camera & AA Battery Case
7 views
- Bounding box
- 80.0 × 40.0 × 23.0 mm
- Engine
- Precision B-rep
- Parameters
- 43
- Published
- August 21, 2026
Download
Free to download and use. See the terms.
The prompt
Totaly not correct
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 80 mm | 50 – 130 |
| Body Width | 40 mm | 30 – 70 |
| Body Height | 20 mm | 12 – 40 |
| Wall Thickness | 2 mm | 1 – 5 |
| Cover Recess Depth | 2 mm | 1 – 4 |
| Front Electronics Bay Length | 30 mm | 22 – 50 |
| Front Electronics Bay Width | 36 mm | 20 – 60 |
| Front Electronics Bay Depth | 12 mm | 6 – 20 |
| Standoff Diameter | 4 mm | 3 – 8 |
| Standoff Height | 6 mm | 3 – 15 |
| Standoff Hole Diameter | 1.8 mm | 1.2 – 3.2 |
| Standoff Y Inset From Wall | 12 mm | 2 – 16 |
| Battery Bay Length | 44 mm | 30 – 60 |
| Battery Bay Width | 28 mm | 20 – 50 |
| Battery Bay Floor Height | 2 mm | 1 – 6 |
| Battery Rail Length | 16 mm | 5 – 40 |
| Battery Rail Width | 2 mm | 1 – 6 |
| Battery Rail Height | 4 mm | 1 – 10 |
| Battery Rail Spacing | 24 mm | 12 – 40 |
| Electronics Lid Length | 32 mm | 20 – 60 |
| Electronics Lid Width | 38 mm | 20 – 65 |
| Electronics Lid Thickness | 2 mm | 1 – 4 |
| Lens Opening Diameter | 12 mm | 6 – 25 |
| Lens X Offset | 0 mm | -20 – 20 |
| Lens Y Offset | 0 mm | -20 – 20 |
| USB Notch Depth | 4 mm | 1 – 10 |
| USB Notch Width | 10 mm | 4 – 20 |
| USB Notch Y Offset | 0 mm | -15 – 15 |
| Vent Slot Length | 6 mm | 2 – 15 |
| Vent Slot Width | 2 mm | 0.5 – 6 |
| Vent Slot Count | 3 mm | 1 – 10 |
| Vent Slot Y Spacing | 5 mm | 2 – 10 |
| Vent Region X Offset | -6 mm | -20 – 20 |
| Battery Cover Length | 44 mm | 20 – 60 |
| Battery Cover Width | 38 mm | 20 – 65 |
| Battery Cover Thickness | 2 mm | 1 – 4 |
| Grip Length | 30 mm | 10 – 60 |
| Grip Width | 10 mm | 5 – 20 |
| Grip Height | 3 mm | 1 – 6 |
| Snap Tab Length | 6 mm | 2 – 15 |
| Snap Tab Width | 3 mm | 1 – 8 |
| Snap Tab Height | 3 mm | 1 – 8 |
| Snap Tabs Per Side | 2 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS