Brackets and mounts
X Quadcopter Frame Plate
- Bounding box
- 177.6 × 177.6 × 2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create a flat X-shaped quadcopter drone frame plate, 2 mm thick, symmetrical along X and Y axes. The diagonal distance between motor centers (wheelbase) is 220 mm. The central body is an octagonal plate measuring 75 mm x 75 mm with 10 mm chamfered corners. Four straight arms extend at 45-degree angles from the center; each arm is 16 mm wide at the base, tapering to 12 mm at the motor mount tip. At the tip of each arm, create a circular motor pad 22 mm in diameter with a central 6 mm shaft hole and four M2 mounting holes (2.2 mm diameter) arranged on a 12 mm x 12 mm square pattern. In the center of the main body, add four M3 mounting holes (3.2 mm diameter) arranged on a 30.5 mm x 30.5 mm square pattern, plus a central 15 mm circular cutout for weight reduction. Add four triangular weight-reduction cutouts inside the central plate between the mounting holes, leaving 5 mm structural ribs. Add 2 mm fillets to all inner arm junctions.
Parameters
| Name | Value | Range |
|---|---|---|
| Diagonal motor-center distance | 220 mm | 120 – 400 |
| Plate thickness | 2 mm | 1 – 5 |
| Central octagon width | 75 mm | 50 – 120 |
| Corner chamfer on body | 10 mm | 2 – 20 |
| Arm width at body | 16 mm | 8 – 30 |
| Arm width at motor pad | 12 mm | 4 – 24 |
| Motor pad diameter | 22 mm | 12 – 40 |
| Motor shaft hole | 6 mm | 2 – 10 |
| M2 motor screw hole | 2.2 mm | 1.5 – 4 |
| M2 hole square pitch | 12 mm | 6 – 20 |
| M3 body screw hole | 3.2 mm | 2 – 5 |
| M3 hole square pitch | 30.5 mm | 12 – 50 |
| Central lightening hole | 15 mm | 5 – 30 |
| Structural rib width | 5 mm | 2 – 10 |
| Inner junction fillet | 2 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
