Loading the interactive model…
Interactive 3D model of X-Frame Micro Quadcopter with Slotted Motor MountsEverything else
X-Frame Micro Quadcopter with Slotted Motor Mounts
6 views
- Bounding box
- 118.0 × 118.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 51
- Published
- August 16, 2026
Download
Free to download and use. See the terms.
The prompt
make slots for the motor make sure they are editBLE
Parameters
| Name | Value | Range |
|---|---|---|
| Motor center radius | 40 mm | 20 – 70 |
| Frame thickness | 1.5 mm | 0.8 – 3 |
| Arm width | 3.5 mm | 2 – 8 |
| Hub width | 44 mm | 20 – 70 |
| Center cutout size | 10 mm | 0 – 30 |
| Center cutout offset | 8 mm | 0 – 25 |
| Motor mount wall thickness | 1 mm | 0.5 – 2.5 |
| Motor mount height | 7 mm | 4 – 12 |
| Motor diameter | 8.5 mm | 6 – 12 |
| Motor mount slots per motor | 2 | 0 – 8 |
| Motor slot width | 0.8 mm | 0.4 – 2 |
| Motor slot start angle | 0 deg | 0 – 360 |
| Propeller diameter | 55 mm | 30 – 90 |
| Guard clearance | 2 mm | 0.5 – 5 |
| Guard width | 1.2 mm | 0.8 – 2.5 |
| Guard thickness | 1 mm | 0.8 – 2 |
| Wire hole diameter | 1.2 mm | 0.5 – 3 |
| Board clearance | 0.4 mm | 0.2 – 1 |
| Component pocket depth | 0.5 mm | 0.2 – 1.2 |
| MPU width | 15.6 mm | 10 – 30 |
| MPU length | 20.3 mm | 10 – 35 |
| MPU position X | 0 mm | -20 – 20 |
| MPU position Y | 0 mm | -20 – 20 |
| ESP32 width | 20 mm | 10 – 40 |
| ESP32 length | 18 mm | 10 – 40 |
| ESP32 position X | 0 mm | -25 – 25 |
| ESP32 position Y | -16.5 mm | -25 – 25 |
| Buck converter width | 15 mm | 8 – 30 |
| Buck converter length | 12 mm | 8 – 30 |
| Buck position X | 0 mm | -20 – 20 |
| Buck position Y | 14 mm | -20 – 20 |
| Driver width | 12 mm | 8 – 30 |
| Driver length | 12 mm | 8 – 30 |
| Driver 1 position X | 15 mm | -25 – 25 |
| Driver 1 position Y | -4 mm | -25 – 25 |
| Driver 2 position X | -15 mm | -25 – 25 |
| Driver 2 position Y | -4 mm | -25 – 25 |
| ToF sensor width | 10.4 mm | 5 – 20 |
| ToF sensor length | 10.4 mm | 5 – 20 |
| Forward ToF position X | 0 mm | -25 – 25 |
| Forward ToF position Y | 16 mm | -25 – 25 |
| Downward ToF position X | 16.5 mm | -25 – 25 |
| Downward ToF position Y | 0 mm | -25 – 25 |
| LiPo tray width | 20 mm | 10 – 40 |
| LiPo tray length | 35 mm | 15 – 60 |
| LiPo tray thickness | 1 mm | 0.6 – 2 |
| Battery strap slot width | 4 mm | 2 – 8 |
| LiPo tray position X | 0 mm | -20 – 20 |
| LiPo tray position Y | 0 mm | -20 – 20 |
| Battery tab height | 4 mm | 2 – 10 |
| Battery tab thickness | 1.5 mm | 0.8 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS