Loading the interactive model…
Interactive 3D model of Wristwatch with Hour Dots and Slim ProfileEverything else
Wristwatch with Hour Dots and Slim Profile
24 views
- Bounding box
- 163.0 × 40.0 × 12.0 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
get coloured with available colours and add points in every hour in the frame. extrude is so rude and high. get thin it.
Parameters
| Name | Value | Range |
|---|---|---|
| Case Diameter | 40 mm | 30 – 50 |
| Case Thickness | 6 mm | 4 – 12 |
| Dial Diameter | 34 mm | 28 – 38 |
| Dial Thickness | 0.6 mm | 0.3 – 2 |
| Dial Offset from Top | 1.5 mm | 0.5 – 4 |
| Crystal Diameter | 38 mm | 32 – 44 |
| Crystal Thickness | 0.5 mm | 0.3 – 2 |
| Crown Diameter | 6 mm | 3 – 10 |
| Crown Length | 4 mm | 2 – 8 |
| Hour Hand Length | 10 mm | 6 – 16 |
| Hour Hand Width | 2 mm | 1 – 4 |
| Minute Hand Length | 14 mm | 8 – 20 |
| Minute Hand Width | 1.5 mm | 0.8 – 3 |
| Hand Thickness | 0.5 mm | 0.2 – 1.5 |
| Strap Width | 20 mm | 14 – 26 |
| Strap Thickness | 2 mm | 1 – 4 |
| Left Strap Length | 110 mm | 80 – 140 |
| Right Strap Length | 90 mm | 60 – 120 |
| Lug Length | 6 mm | 3 – 10 |
| Lug Thickness | 3 mm | 1.5 – 5 |
| Number of Holes | 8 | 4 – 12 |
| Slot Length | 5 mm | 3 – 8 |
| Slot Width | 2 mm | 1 – 3 |
| Hole Offset from End | 10 mm | 5 – 20 |
| Hole Spacing | 6 mm | 4 – 10 |
| Buckle Outer Width | 18 mm | 14 – 22 |
| Buckle Length | 20 mm | 15 – 30 |
| Buckle Thickness | 1.8 mm | 1 – 3 |
| Pin Length | 8 mm | 4 – 12 |
| Pin Width | 2.5 mm | 1.5 – 5 |
| Pin Thickness | 1 mm | 0.5 – 2 |
| Keeper Outer X | 18 mm | 12 – 24 |
| Keeper Outer Y | 6 mm | 4 – 10 |
| Keeper Outer Z | 6 mm | 4 – 10 |
| Keeper Thickness | 1.2 mm | 0.8 – 2 |
| Hour Dot Diameter | 2 mm | 0.8 – 4 |
| Hour Dot Height | 0.4 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS