Everything else
Wooden Spoon 450mm
- Bounding box
- 449.9 × 109.9 × 75.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D model of a wooden spoon carved from a blank measuring 500 × 200 × 25 mm. Overall spoon length: 450 mm. Bowl length: approximately 150 mm. Bowl width: 105–115 mm. Handle raised relative to the bowl by approximately 10°. Bowl depth: 18–20 mm. Remaining bowl bottom thickness: 6–8 mm. Generate three accurate projections: 1. Top view — external cutting outline and inner bowl boundary. 2. Longitudinal side profile — showing the raised handle and the actual bowl depth. 3. Cross-sections of the handle and bowl — the bowl cross-section must be clearly U-shaped.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 450 mm | 300 – 600 |
| Bowl length | 150 mm | 80 – 250 |
| Bowl width | 110 mm | 60 – 200 |
| Bowl rim height / blank thickness | 25 mm | 15 – 50 |
| Bowl inside depth | 19 mm | 8 – 30 |
| Outer underside bulge radius | 40 mm | 26 – 70 |
| Bowl side wall thickness | 6 mm | 3 – 15 |
| Solid rim width at handle end | 18 mm | 8 – 40 |
| Handle rise angle | 10 deg | 0 – 30 |
| Handle width at bowl | 22 mm | 10 – 40 |
| Handle thickness at bowl | 14 mm | 8 – 30 |
| Handle width at tip | 16 mm | 8 – 40 |
| Handle thickness at tip | 10 mm | 6 – 30 |
| Handle insertion into bowl | 5 mm | 0 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
