Brackets and mounts
Wooden Bench with Full-Length Left-Opening Drawer
- Bounding box
- 2070.0 × 502.5 × 830.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Wooden bench 200 cm long, seat hight 48 cm, seat depth 45 cm. organicly shaped to ensure comfortable seating. placed against and mounted to wall with a cushion seating and backing. over the full length there needs to be an drawer that rolls out of the left side to put in equipment running the entire length of the bench. This space needs to hold equipment with dimensions 35 high and 35 wide. the structure of the bench needs to hold 500 kilograms in total, the drawer needs to hold about 100 kilos in total. Make sure there's room for wheels on the bottom of the drawer and wooden guides on the inside of the bench to keep the drawer aligned.
Parameters
| Name | Value | Range |
|---|---|---|
| Bench Length | 2000 mm | 1000 – 3000 |
| Bench Depth | 450 mm | 300 – 800 |
| Seat Height | 480 mm | 300 – 600 |
| Seat Cushion Thickness | 40 mm | 20 – 100 |
| Back Panel Height | 350 mm | 200 – 600 |
| Back Cushion Thickness | 50 mm | 20 – 100 |
| Frame Thickness | 20 mm | 10 – 50 |
| Drawer Outer Width | 380 mm | 200 – 500 |
| Drawer Outer Depth (length) | 1900 mm | 1000 – 2500 |
| Drawer Outer Height | 360 mm | 200 – 500 |
| Equipment Width | 350 mm | 100 – 500 |
| Equipment Height | 350 mm | 100 – 500 |
| Wheel Diameter | 50 mm | 20 – 100 |
| Drawer Guide Width | 20 mm | 10 – 50 |
| Drawer Guide Thickness | 10 mm | 5 – 30 |
| Wall Bracket Size | 100 mm | 50 – 200 |
| Wall Bracket Thickness | 5 mm | 3 – 10 |
| Seat Cushion Edge Radius | 15 mm | 5 – 30 |
| Back Cushion Edge Radius | 15 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent