Plates and panels
Wooden Bed Headboard
- Bounding box
- 1700 × 54 × 1351.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Glue lines appear under the back-support slats. Then, exactly 44 screws (size 4x35 mm) fly into place and spin rapidly into the supports, locking the core panel together. - On-screen Text: "4. Fasten with glue and 44 x (4x35mm) screws"
Parameters
| Name | Value | Range |
|---|---|---|
| Plank length / panel width between posts | 1600 mm | 800 – 2400 |
| Plank width, one board of the stack | 95 mm | 50 – 200 |
| Plank thickness | 20 mm | 10 – 40 |
| Number of stacked horizontal planks | 12 mm | 3 – 30 |
| Chamfer on the plank long edges | 1.5 mm | 0.5 – 4 |
| Panel set-back behind the frame front | 5 mm | 0 – 20 |
| Alternating depth offset for rustic look | 1.8 mm | 0 – 4 |
| Number of wood grain distress grooves per plank | 5 mm | 0 – 10 |
| Depth of wood grain distress grooves | 1.2 mm | 0.2 – 3 |
| Distressed wood knots and imperfections | 1 | 0 – 1 |
| Weathered edge nicks and wood splits | 1 | 0 – 1 |
| Number of vertical support battens | 4 mm | 2 – 8 |
| Batten width | 30 mm | 15 – 80 |
| Batten thickness | 20 mm | 10 – 40 |
| Show glue squeeze-out lines under back support battens | 1 | 0 – 1 |
| Total count of 4x35mm screws driven into back battens | 44 mm | 0 – 88 |
| Screw diameter | 4 mm | 3 – 6 |
| Screw length | 35 mm | 20 – 50 |
| Display assembly instruction banner | 1 | 0 – 1 |
| Square side-post timber size | 50 mm | 30 – 100 |
| Square top-rail timber size | 50 mm | 30 – 100 |
| Post length, floor to top of headboard | 1300 mm | 600 – 2200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Modular Commercial Kiosk Container
A modern modular commercial kiosk container, 4.5m in width, 2.5m in depth, and 3.35m in total height. The main body is a hollow rectangular prism with a wall, floor, and roof thick
Electric Control Panel 1m
I want an electric panel 1m by 1m with green start and red stop bottom