Plates and panels
Modular Commercial Kiosk Container
- Bounding box
- 4500 × 3200 × 3350 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
A modern modular commercial kiosk container, 4.5m in width, 2.5m in depth, and 3.35m in total height. The main body is a hollow rectangular prism with a wall, floor, and roof thickness of 0.1m. On the front 4.5m facade, there is a large rectangular cutout for the display windows and service counter starting 0.8m above the ground level and extending up to 2.45m high. At the top of the front facade, from 2.65m to 3.35m height, there is a prominent rectangular fascia panel (attic) protruding 0.04m forward. Below this top fascia, a sloped rectangular awning (canopy) extends outward by 0.75m at a downward 15-degree angle. On the left side facade, near the back, include a vertical rectangular door cutout measuring 0.8m in width and 2.0m in height. All geometry must be clean, manifold, and aligned with millimeters or meters as the primary unit scale.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall body width | 4500 mm | 2000 – 6000 |
| Overall body depth | 2500 mm | 1500 – 4000 |
| Overall body height | 3350 mm | 2000 – 4500 |
| Wall / floor / roof thickness | 100 mm | 60 – 200 |
| Opening width | 3600 mm | 500 – 4300 |
| Opening bottom above ground | 800 mm | 100 – 2000 |
| Opening top above ground | 2450 mm | 500 – 3000 |
| Door opening width | 800 mm | 500 – 1500 |
| Door opening height | 2000 mm | 1000 – 3000 |
| Door centre along depth | 700 mm | -800 – 1000 |
| Fascia panel height | 700 mm | 200 – 1200 |
| Fascia protrusion | 40 mm | 10 – 120 |
| Canopy width | 4500 mm | 1000 – 6000 |
| Outward projection | 750 mm | 200 – 1500 |
| Panel thickness | 50 mm | 20 – 120 |
| Downward slope | 15 deg | 0 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec