Loading the interactive model…
Interactive 3D model of Wireless Mouse (Logitech G703 inspired)Everything else
Wireless Mouse (Logitech G703 inspired)
29 views
- Bounding box
- 125.0 × 140.0 × 44.3 mm
- Engine
- Precision B-rep
- Parameters
- 44
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a wireless mouse like logi G703
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 125 mm | 100 – 150 |
| Overall width | 68 mm | 50 – 80 |
| Max shell height (peak) | 40 mm | 30 – 50 |
| Peak pos from front | 0.35 dimensionless | 0.2 – 0.6 |
| Top edge fillet | 2 mm | 0.5 – 5 |
| Base thickness | 2 mm | 1 – 5 |
| Floor thickness | 1.5 mm | 0.5 – 4 |
| Button gap | 1 mm | 0.5 – 3 |
| Left button length | 20 mm | 10 – 30 |
| Left button width | 10 mm | 5 – 20 |
| Left button thickness | 2 mm | 1 – 5 |
| Right button length | 20 mm | 10 – 30 |
| Right button width | 10 mm | 5 – 20 |
| Right button thickness | 2 mm | 1 – 5 |
| Wheel diameter | 18 mm | 12 – 25 |
| Wheel width | 8 mm | 4 – 15 |
| Wheel protrusion | 4 mm | 1 – 8 |
| DPI switch X | 8 mm | 4 – 15 |
| DPI switch Y | 8 mm | 4 – 15 |
| DPI switch Z | 4 mm | 1 – 8 |
| DPI top button dia | 6 mm | 3 – 10 |
| DPI top button height | 2 mm | 1 – 5 |
| Forward side btn length | 12 mm | 6 – 20 |
| Forward side btn width | 3 mm | 1 – 5 |
| Forward side btn height | 8 mm | 3 – 15 |
| Backward side btn length | 12 mm | 6 – 20 |
| Backward side btn width | 3 mm | 1 – 5 |
| Backward side btn height | 8 mm | 3 – 15 |
| Side btn vertical spacing | 11 mm | 6 – 20 |
| Side btn X center | -38 mm | -50 – -20 |
| Sensor X | 10 mm | 5 – 20 |
| Sensor Y | 10 mm | 5 – 20 |
| Sensor Z | 3 mm | 1 – 8 |
| PCB length | 80 mm | 50 – 100 |
| PCB width | 40 mm | 20 – 60 |
| PCB thickness | 1.6 mm | 1 – 2.5 |
| Battery diameter | 14 mm | 10 – 20 |
| Battery length | 50 mm | 30 – 70 |
| Power switch length | 8 mm | 4 – 15 |
| Power switch width | 4 mm | 2 – 8 |
| Power switch height | 6 mm | 2 – 12 |
| USB receiver length | 15 mm | 8 – 25 |
| USB receiver width | 8 mm | 4 – 15 |
| USB receiver thickness | 4 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS