Everything else
Wireless Charger Enclosure with Rounded Phone Rail Ends
- Bounding box
- 140 × 94 × 29.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
the side rail can you shorten them from the top by 4mm
Parameters
| Name | Value | Range |
|---|---|---|
| Base external length | 140 mm | 80 – 250 |
| Base external width | 94 mm | 94 – 94 |
| Base height | 13 mm | 5 – 50 |
| Base wall thickness | 2 mm | 1.2 – 5 |
| Base floor thickness | 2 mm | 1.2 – 5 |
| Exterior corner radius | 6 mm | 1 – 20 |
| Opening length along side wall | 14 mm | 14 – 14 |
| Opening height | 4 mm | 4 – 4 |
| Distance from bottom-right external corner to nearest edge | 50 mm | 50 – 50 |
| Gap above inside floor surface | 1 mm | 1 – 1 |
| Lid plate length | 140 mm | 80 – 250 |
| Lid plate width | 94 mm | 94 – 94 |
| Lid plate thickness | 2 mm | 1.2 – 6 |
| Locating lip wall thickness | 1.5 mm | 1.2 – 4 |
| Locating lip height below lid | 4 mm | 1 – 12 |
| Clearance per side to base opening | 0.2 mm | 0.1 – 0.5 |
| Clear opening between rail inner faces | 88 mm | 88 – 88 |
| Rail side wall thickness | 3 mm | 3 – 3 |
| Clear height beneath retaining lips | 12.5 mm | 12.5 – 12.5 |
| Retaining lip inward overhang | 3 mm | 1 – 8 |
| Retaining lip thickness | 2 mm | 1.2 – 5 |
| Bottom rail wall depth | 3 mm | 3 – 3 |
| Bottom corner smoothing height reference | 6 mm | 2 – 20 |
| Open rail end fillet radius | 1 mm | 0.4 – 1.5 |
| Rounded phone entry lead-in length | 10 mm | 4 – 18 |
| Retaining lip end taper length | 5 mm | 5 – 5 |
| Shorten side rails from open top end | 4 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm