Everything else
Wireless Charger Enclosure with Rounded Phone Rail Ends
- Bounding box
- 140 × 94 × 29.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 26
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Remove the remaining small pointed tab projecting from each rail’s entry tip. Trim it flush with the rounded end and blend the surfaces smoothly. Keep the retaining lip farther along each rail so the phone remains secure. Preserve all phone clearances and other dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Base external length | 140 mm | 80 – 250 |
| Base external width | 94 mm | 94 – 94 |
| Base height | 13 mm | 5 – 50 |
| Base wall thickness | 2 mm | 1.2 – 5 |
| Base floor thickness | 2 mm | 1.2 – 5 |
| Exterior corner radius | 6 mm | 1 – 20 |
| Opening length along side wall | 14 mm | 14 – 14 |
| Opening height | 4 mm | 4 – 4 |
| Distance from bottom-right external corner to nearest edge | 50 mm | 50 – 50 |
| Gap above inside floor surface | 1 mm | 1 – 1 |
| Lid plate length | 140 mm | 80 – 250 |
| Lid plate width | 94 mm | 94 – 94 |
| Lid plate thickness | 2 mm | 1.2 – 6 |
| Locating lip wall thickness | 1.5 mm | 1.2 – 4 |
| Locating lip height below lid | 4 mm | 1 – 12 |
| Clearance per side to base opening | 0.2 mm | 0.1 – 0.5 |
| Clear opening between rail inner faces | 88 mm | 88 – 88 |
| Rail side wall thickness | 3 mm | 3 – 3 |
| Clear height beneath retaining lips | 12.5 mm | 12.5 – 12.5 |
| Retaining lip inward overhang | 3 mm | 1 – 8 |
| Retaining lip thickness | 2 mm | 1.2 – 5 |
| Bottom rail wall depth | 3 mm | 3 – 3 |
| Bottom corner smoothing height reference | 6 mm | 2 – 20 |
| Open rail end fillet radius | 1 mm | 0.4 – 1.5 |
| Rounded phone entry lead-in length | 10 mm | 4 – 18 |
| Retaining lip end taper length | 5 mm | 5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm