Wireless Charger Enclosure with Phone Rails

1 views

Bounding box: 160 × 94 × 29.5 mm
Engine: 3D Printing B-rep
Parameters: 23
Published: November 10, 2026

Download

Free to download and use. See the terms.

The prompt

the charging point needs to be 50mm from the bottom

Parameters

Name	Value	Range
Base external length	160 mm	80 – 250
Base external width	94 mm	40 – 150
Base height	13 mm	5 – 50
Base wall thickness	2 mm	1.2 – 5
Base floor thickness	2 mm	1.2 – 5
Exterior corner radius	6 mm	1 – 20
Opening length along side wall	14 mm	14 – 14
Opening height	4 mm	4 – 4
Distance from bottom-right external corner to nearest edge	50 mm	50 – 50
Gap above inside floor surface	1 mm	1 – 1
Lid plate length	160 mm	80 – 250
Lid plate width	94 mm	40 – 150
Lid plate thickness	2 mm	1.2 – 6
Locating lip wall thickness	1.5 mm	1.2 – 4
Locating lip height below lid	4 mm	1 – 12
Clearance per side to base opening	0.2 mm	0.1 – 0.5
Clear opening between rail inner faces	88 mm	50 – 120
Rail side wall thickness	3 mm	1.2 – 8
Clear height beneath retaining lips	12.5 mm	5 – 25
Retaining lip inward overhang	3 mm	1 – 8
Retaining lip thickness	2 mm	1.2 – 5
Bottom stop depth	8 mm	3 – 20
Bottom corner smoothing height reference	6 mm	2 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS