Wine Glass with Cooling Chamber (Exploded)

Create a **real, editable 3D CAD model** based exactly on my attached reference wine glass. ### Shape * **Do NOT redesign the glass shape.** * Copy the reference glass's bowl, curvature, rim, stem and base as closely as possible. * **Overall height: 235 mm** * **Maximum outside bowl diameter: 125 mm** * **Base diameter: 100 mm** * The **125 mm is the maximum external diameter**, not the inner diameter. * When the cooling chamber is hidden, the glass must look like my reference. ### Cooling system Add a **sealed double-wall chamber** around the lower **40–55% of the bowl**. * Target water: **100 g ≈ 100 mL** * Target chamber volume: **100,000 mm³** * Acceptable: **95–105 mL** * Water must be distributed as a **thin curved layer following the bowl**, NOT a large block or tank. * Keep the chamber completely inside the **125 mm maximum diameter**. * Do not put cooling water in the rim, wine cavity or stem. * The chamber should gradually become larger toward the bottom. ### Wall thickness Use approximately: * Rim: **0.8–1.0 mm** * Upper bowl: **1.0–1.2 mm** * Middle: **1.2–1.5 mm** * Lower bowl: **1.5–1.8 mm** * Bottom: **1.8–2.2 mm** Keep transitions smooth and elegant. ### CAD structure Create separate bodies for: 1. Glass 2. Wine cavity 3. Sealed cooling chamber 4. 100 mL water volume I need to be able to hide the glass and inspect the water chamber. ### Verify Before finishing, verify: * Height = **235 mm** * Maximum outside diameter = **125 mm** * Base = **100 mm** * Water chamber = **~100 mL** * Chamber is sealed * External silhouette matches my reference ### Output Give me an **actual 3D CAD model**, preferably: * STEP * STL * 3MF * Native CAD format Also provide a transparent cross-section showing the cooling chamber. **Most important:** do not invent a new glass shape. **Use my attached glass as the exact shape and only integrate the 100 g curved cooling chamber into it.**

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.