Wind Turbine - CFD Ready (Curved Blades)

1 views

Bounding box: 4000.0 × 3000.0 × 1364.7 mm
Engine: Precision B-rep
Parameters: 27
Published: October 4, 2026

Download

Free to download and use. See the terms.

The prompt

I need to import it in autodesk CFD and run the simulation

Parameters

Name	Value	Range
Base Plate Size	400 mm	100 – 1200
Base Thickness	30 mm	5 – 120
Mount Hole Spacing	300 mm	40 – 1100
Mount Hole Diameter	12 mm	3 – 50
Tower Height	700 mm	100 – 2500
Tower Base Diameter	140 mm	30 – 600
Tower Top Diameter	90 mm	20 – 500
Nacelle Length	320 mm	50 – 1200
Nacelle Width	150 mm	40 – 600
Nacelle Height	150 mm	40 – 600
Nacelle X Start	-100 mm	-800 – 800
Flange Diameter	120 mm	30 – 500
Flange Thickness	25 mm	5 – 150
Flange Bolt Count	6 pcs	3 – 16
Bolt Circle Diameter	90 mm	20 – 450
Flange Bolt Hole Dia	10 mm	2 – 40
Hub Diameter	90 mm	20 – 500
Hub Length	70 mm	10 – 400
Blade Count	3 pcs	2 – 6
Blade Length	500 mm	50 – 2500
Blade Chord / Width	80 mm	10 – 500
Blade Thickness	10 mm	2 – 100
Blade Sweep Angle	12 deg	0 – 60
Blade Root Embedment	25 mm	0 – 200
Tunnel Floor Length (X)	4000 mm	500 – 15000
Tunnel Floor Width (Y)	3000 mm	500 – 15000
Tunnel Floor Thickness	40 mm	5 – 400

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS