Wind Tunnel C & I Building Models (ANSYS)

1 views

Bounding box: 138.0 × 181.0 × 69.0 mm
Engine: Precision B-rep
Parameters: 22
Published: October 3, 2026

Download

Free to download and use. See the terms.

The prompt

also give me the i shaped model with flow tunnel same as before

Parameters

Name	Value	Range
C-Building Length (X)	40 mm	10 – 200
C-Building Width (Y)	30 mm	10 – 200
C-Building Height (Z)	40 mm	10 – 200
C-Building Wall	3 mm	1 – 20
I-Building Length (X)	40 mm	10 – 200
I-Building Width (Y)	30 mm	10 – 200
I-Building Height (Z)	40 mm	10 – 200
I Flange Thickness	3 mm	1 – 20
I Web Thickness	3 mm	1 – 20
Tunnel Wall Thickness	4 mm	1 – 20
Side Clearance	5 mm	1 – 50
Top Clearance	5 mm	1 – 50
Tunnel Floor Thickness	5 mm	1 – 30
Upstream Length	20 mm	5 – 300
Downstream Length	40 mm	5 – 400
Tunnel Corner Radius	3 mm	0 – 10
Tunnel Centre Spacing (Y)	83 mm	70 – 300
Ground Plate Thickness	5 mm	1 – 30
Ground Plate Margin	15 mm	0 – 100
Collar Flange Thickness	4 mm	1 – 30
Collar Flange Width	10 mm	0 – 60
Mesh Fillet Radius	1 mm	0 – 5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS