Brackets and mounts
Welded Steel Wall Bracket
- Bounding box
- 120.0 × 258.0 × 200.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- October 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric welded steel wall bracket for supporting a horizontal beam. The bracket must consist of a vertical mounting plate, 200 mm high × 120 mm wide × 8 mm thick. Add four Ø12 mm mounting holes arranged symmetrically near the corners of the mounting plate. From the center of the plate, create a horizontal support arm projecting 250 mm outward. The arm should be made from rectangular hollow section 60 × 40 × 3 mm, with the 60 mm dimension vertical. Add two triangular 6 mm thick gusset plates between the mounting plate and the support arm, one on each side of the arm. The gussets should automatically adapt if the arm length or bracket height changes. Keep the main dimensions editable parameters. Make the design symmetric and suitable for welding.
Parameters
| Name | Value | Range |
|---|---|---|
| Mounting Plate Width | 120 mm | 60 – 320 |
| Mounting Plate Height | 200 mm | 100 – 450 |
| Mounting Plate Thickness | 8 mm | 4 – 20 |
| Mounting Hole Diameter | 12 mm | 6 – 24 |
| Hole Centre Inset From Edge | 20 mm | 10 – 60 |
| Support Arm Projection | 250 mm | 100 – 500 |
| Arm Section Height (vertical) | 60 mm | 20 – 120 |
| Arm Section Width | 40 mm | 20 – 100 |
| RHS Wall Thickness | 3 mm | 1 – 8 |
| Gusset Plate Thickness | 6 mm | 3 – 20 |
| Gusset Leg Down Plate | 100 mm | 20 – 200 |
| Gusset Leg Along Arm | 150 mm | 20 – 260 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu