Brackets and mounts
Wearable Suprasternal Sensor Patch
- Bounding box
- 40.0 × 20.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- October 7, 2026
Download
Free to download and use. See the terms.
The prompt
Small soft wearable medical sensor patch, compact rounded rectangular capsule shape, approximately 40 mm long × 20 mm wide × 8 mm thick. Smooth highly rounded corners and edges, low-profile ergonomic body designed to conform to the skin over the suprasternal notch. Slightly curved/convex outer surface and a smooth flat-to-gently-curved skin-facing surface. Two-piece encapsulated housing concept with a thin upper shell and lower skin-contact layer, leaving an internal cavity for a flexible PCB, two miniature microphones, IMU, BLE electronics, flash memory and a small battery. No buttons, no display, no external connectors. Compact symmetrical pebble-like form, soft wearable medical patch appearance, seamless rounded exterior, suitable as a master model for silicone molding. Avoid bulky enclosure features, sharp corners, screw bosses, belt clips, straps, or smartwatch-like geometry.
Parameters
| Name | Value | Range |
|---|---|---|
| Patch Length | 40 mm | 20 – 80 |
| Patch Width | 20 mm | 10 – 40 |
| Patch Height | 8 mm | 4 – 20 |
| Lower Skin Layer Thickness | 2 mm | 0.5 – 5 |
| Shell Side Wall | 2.5 mm | 1 – 6 |
| Shell Crown Thickness | 1.5 mm | 0.5 – 5 |
| Plan Corner Radius | 8 mm | 1 – 9.5 |
| Top Pebble Round-Over | 2.5 mm | 0.5 – 5 |
| Skin-Side Edge Round | 0.8 mm | 0.1 – 1.5 |
| PCB Length | 30 mm | 10 – 38 |
| PCB Width | 14.5 mm | 5 – 19 |
| PCB Thickness | 0.5 mm | 0.1 – 2 |
| Battery Length | 20 mm | 5 – 36 |
| Battery Width | 12 mm | 5 – 18 |
| Battery Thickness | 3 mm | 1 – 6 |
| Component Height | 1 mm | 0.3 – 3 |
| MEMS Mic Length | 3.5 mm | 1 – 8 |
| MEMS Mic Width | 2.6 mm | 1 – 8 |
| Mic Spacing (from centre) | 12 mm | 2 – 13 |
| IMU Footprint | 3 mm | 1 – 8 |
| BLE Module Size | 6 mm | 2 – 12 |
| BLE Offset X | -6.5 mm | -18 – 18 |
| BLE Offset Y | -3.5 mm | -9 – 9 |
| Flash Length | 4 mm | 1 – 10 |
| Flash Width | 3 mm | 1 – 8 |
| Flash Offset X | -1 mm | -18 – 18 |
| Flash Offset Y | -3.5 mm | -9 – 9 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu