Everything else
Wearable Smart Pendant Body
- Bounding box
- 45.2 × 75.2 × 36.2 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model only. Do NOT create a water droplet. Match the outer profile of a modern wearable smart pendant. The shape should resemble a rounded pebble or wearable pendant, not a drop of water. Requirements: • Top must be a large smooth semicircular dome. • The widest point should be just below the hanging ears. • The body should remain almost oval through the upper 60% of its height. • Only the lower 30–35% should gradually taper. • The bottom should end in a rounded tip, not a sharp point. • The left and right sides must be perfectly symmetrical. • Maintain smooth continuous curvature with no straight edges. Keep unchanged: - Height 75 mm - Width 45 mm - Thickness 18 mm - Two hanging ears - Hole diameter - Hole spacing Do not add: Camera Speaker Sensor holes USB port Buttons Internal features Return only the improved outer body.
Parameters
| Name | Value | Range |
|---|---|---|
| Height | 75 mm | 50 – 120 |
| Width | 45 mm | 30 – 80 |
| Thickness | 18 mm | 10 – 30 |
| Hole Diameter | 4 mm | 2 – 8 |
| Hole Spacing | 25 mm | 15 – 50 |
| Edge Fillet Radius | 1.5 mm | 0.1 – 4 |
| Ear Diameter | 8 mm | 4 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like