Brackets and mounts
Wearable Enclosure (2-Part)
- Bounding box
- 218.0 × 78.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 5, 2026
Download
Free to download and use. See the terms.
The prompt
Use the attached mechanical drawing and prototype photographs as reference. Create the basic outer housing around the existing electronic assembly. Do not modify, resize, or reposition any existing PCB, ESP32, EFR module, MAX30102 sensor, display, battery, or wiring. Treat all existing components as fixed reference geometry. Create a compact rectangular wearable enclosure with rounded corners that follows the approximate footprint of the existing assembly: Length: approximately 98 mm Width: approximately 78 mm Height: determine from the existing component stack, keeping adequate clearance. Use approximately 2–2.5 mm wall thickness and 3–6 mm external corner radius. Create the housing as two separate parts: Lower body Upper cover The lower body should surround the existing electronics while the upper cover sits above them. Do not add detailed mounting features, sensor openings, buttons, or connectors yet. The objective of this step is only to establish the correct overall housing shape, size, and clearance around the existing assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 98 mm | 80 – 120 |
| Width | 78 mm | 60 – 100 |
| Lower Body Height | 10 mm | 5 – 40 |
| Lower Wall Thickness | 2.5 mm | 1 – 5 |
| Lower Corner Radius | 6 mm | 2 – 12 |
| Lower Floor Thickness | 3 mm | 1 – 8 |
| Upper Cover Height | 8 mm | 3 – 40 |
| Upper Wall Thickness | 2 mm | 1 – 5 |
| Upper Corner Radius | 4 mm | 2 – 12 |
| Upper Top Thickness | 2 mm | 1 – 8 |
| Exploded Layout Gap | 120 mm | 100 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent