Brackets and mounts
Wearable Electronics Enclosure
- Bounding box
- 60.0 × 40.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable two-piece electronics enclosure for a wearable hand/wrist band. Rounded rectangular enclosure, removable top lid, internal cavity for microcontroller, motion sensor, battery and wiring, side slots for a 20–25 mm wide Velcro strap, rectangular opening on the top lid for a 0.96-inch OLED display, USB-C charging-port opening on the side, 2 mm wall thickness, M2 screw mounting posts, no sharp edges, designed for FDM 3D printing.”
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length | 60 mm | 40 – 100 |
| Enclosure Width | 40 mm | 30 – 80 |
| Enclosure Height | 20 mm | 15 – 40 |
| Wall Thickness | 2 mm | 1 – 4 |
| Lid Thickness | 2 mm | 1 – 4 |
| Strap Slot Width | 25 mm | 20 – 25 |
| Strap Slot Height | 4 mm | 3 – 6 |
| Display Width | 25 mm | 20 – 30 |
| Display Height | 14 mm | 10 – 20 |
| USB Opening Width | 9 mm | 8 – 12 |
| USB Opening Height | 4 mm | 3 – 6 |
| Screw Diameter | 2 mm | 1.5 – 3 |
| Screw Post Diameter | 5 mm | 4 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent