Everything else
WD Car Chassis (RC Flat-Deck)
- Bounding box
- 260.0 × 100.0 × 17.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
give me a wd car chassis in stl format
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 260 mm | 150 – 400 |
| Chassis Width | 100 mm | 60 – 160 |
| Plate Thickness | 3 mm | 1.5 – 8 |
| Central Spine Width | 30 mm | 12 – 60 |
| Side Rail Width | 12 mm | 6 – 30 |
| Plan Corner Radius | 12 mm | 0 – 25 |
| Front Kick-up Length | 45 mm | 10 – 120 |
| Front Kick-up Rise | 14 mm | 0 – 40 |
| Slot Rear Margin | 25 mm | 5 – 120 |
| Slot Front Margin | 60 mm | 5 – 150 |
| Driveshaft Bearing Bore | 12 mm | 4 – 25 |
| Front Bearing X | 205 mm | 120 – 250 |
| Rear Bearing X | 20 mm | 8 – 80 |
| Motor Mount Hole Dia | 4 mm | 2 – 8 |
| Motor Mount Centre X | 75 mm | 30 – 150 |
| Motor Hole Pitch (X) | 40 mm | 10 – 80 |
| Motor Hole Pitch (Y) | 20 mm | 8 – 24 |
| Suspension Pivot Hole Dia | 5 mm | 2 – 10 |
| Front Pivot Hole X | 175 mm | 100 – 245 |
| Rear Pivot Hole X | 45 mm | 15 – 120 |
| Bumper Mount Hole Dia | 4 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm