Wave Makeup Brush Organizer

Create a functional FDM 3D-printable makeup brush organizer based closely on the attached reference image. The organizer must look elegant and sculptural, like a premium ceramic or stone home-decor object, while being practical for daily makeup storage. Create ONE connected body with exactly 3 integrated vertical compartments arranged from tallest on the left/back to shortest on the right/front. Overall target dimensions: * Width: 190 mm * Depth: 90 mm * Maximum height: 140 mm Compartment 1 – large face brushes: * tallest compartment * internal height: 125 mm * internal width: approximately 70 mm * internal depth: approximately 65 mm Compartment 2 – medium brushes: * internal height: 95 mm * internal width: approximately 60 mm * internal depth: approximately 60 mm Compartment 3 – small eye brushes: * lowest compartment * internal height: 72 mm * internal width: approximately 52 mm * internal depth: approximately 55 mm Shape: * closely follow the attached reference image * create one smooth flowing wave across the upper edge * highest on the left/back * smoothly descend through the middle * lowest on the right/front * use large smooth curves * rounded outer corners * subtle curved front silhouette * no sharp transitions * no rectangular office-organizer appearance Construction: * all 3 compartments must be fused into one continuous solid body * each compartment must be hollow and usable * each compartment must have a closed bottom * no through-holes in the base * flat stable bottom * smooth rounded internal corners for easy cleaning Material efficiency is important: * do NOT make the organizer a solid block * outer walls: 2.4 mm * internal dividers: 2.2–2.4 mm * base thickness: 3.0 mm * use hollow compartment volumes * use only local reinforcement where required * minimize filament while maintaining rigidity Stability: * wide stable footprint * must remain stable when filled with tall and heavy makeup brushes * reinforce the bottom transitions between compartments * no narrow pedestal or detachable parts 3D printing: * designed for Creality Ender 3 Pro * fit within 220 x 220 x 250 mm * print flat on the base * one connected manifold body * no floating geometry * avoid supports where possible * avoid overhangs greater than approximately 45 degrees * use fillets or gradual transitions instead of unsupported geometry Appearance: * elegant * minimal * soft sculptural curves * premium vanity organizer * ceramic / stone inspired * no text * no logo * no decorative patterns * no handles * no lid Important: The final design should visually resemble the attached reference image, not a generic three-compartment pen holder. Prioritize the flowing sculptural silhouette and elegant proportions while keeping the geometry simple enough for reliable FDM printing.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.