111.9199.945.2
Loading the interactive model…
Interactive 3D model of Wave door handle pair (raspberry)

Everything else

Wave door handle pair (raspberry)

1 views
Bounding box
199.9 × 111.9 × 45.2 mm
Engine
3D Printing B-rep
Parameters
13
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Wave door handle pair, raspberry pink, 200 mm long, 24 mm bar width, 46 mm span. Ends should be longer but straight, not bendy: wave ends continue as straight tangent tails out to the side.

Parameters

NameValueRange
Overall length200 mm120 – 300
Overall wave span, side to side46 mm25 – 60
Grip bar width24 mm10 – 30
Grip bar thickness, front to back16 mm8 – 25
Wave periods incl. ends (x.5 = ends on opposite sides)2.5 mm1.5 – 3.5
How far the straight ends reach toward the side (1 = to the edge of the span)1 mm0 – 1.2
Which centre crossings carry the posts (1 = outermost, widest stance)1 mm1 – 2
Clearance between door and grip30 mm20 – 50
Post diameter16 mm10 – 24
Screw hole diameter - 5.6 = M4 heat-set insert, 3.3 = tap M4 directly5.6 mm2.5 – 8
Screw hole depth12 mm5 – 30
Flat on the front face so it prints face-down0.8 mm0 – 3
Gap between the two handles20 mm2 – 200

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Wave door handle pair (raspberry) - Free CAD Model (STEP, STL) | TextoCAD