Enclosures and housings
Water Rocket Socket
- Bounding box
- 61.0 × 61.0 × 49.5 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- September 9, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single-body, highly precise 3D mechanical water rocket socket with a central through-hole axis (Bore ID: 9.5mm) for 3D printing, following these exact coordinates and dimensions: 1. Base Section (Gardena-style Male Quick Connector): - Outer profile centered around the 9.5mm bore. - Tip Outer Diameter: 15.8mm. - Retaining Ring (Catch Ridge) OD: 18.0mm. - Locking Groove Diameter: 14.5mm. - Total exposed length of this connector section: 17.0mm. 2. Middle Section (Stop Flange): - Positioned immediately above the Gardena connector. - Outer Diameter: 61.0mm (to match a 60.0mm OD pipe). - Flange Thickness (Height): 4.5mm. - Apply a transition fillet of R1.7mm at the junction between the flange and the nozzle neck. 3. Top Section (Pipe Insertion Plug): - Positioned immediately above the Stop Flange. - Insertion Plug Outer Diameter: 55.5mm (tight sliding fit tolerance for a 56.0mm ID PC pipe). - Insertion Length (Height): 28.0mm. - Apply a lead-in chamfer of C1.2mm on the top outer edge. 4. O-Ring Groove (Integrated inside the Insertion Plug): - Located 6.5mm below the top edge of the insertion plug. - Groove Root (Bottom) Diameter: 50.8mm (Radial depth of 2.35mm from the plug OD). - Groove Width (Height): 4.0mm. - Apply an edge fillet of R0.3mm to the internal corners of the groove. Output the final 3D model as a solid watertight B-Rep body in STEP and STL formats.
Parameters
| Name | Value | Range |
|---|---|---|
| Bore ID | 9.5 mm | 5 – 20 |
| Tip Outer Diameter | 15.8 mm | 10 – 20 |
| Locking Groove Diameter | 14.5 mm | 10 – 20 |
| Retaining Ring OD | 18 mm | 12 – 25 |
| Exposed Connector Length | 17 mm | 10 – 30 |
| Tip Length | 6 mm | 1 – 15 |
| Locking Groove Length | 5 mm | 1 – 10 |
| Stop Flange Outer Diameter | 61 mm | 50 – 80 |
| Flange Thickness | 4.5 mm | 2 – 10 |
| Flange-Neck Fillet Radius | 1.7 mm | 0.2 – 2.2 |
| Insertion Plug Outer Diameter | 55.5 mm | 45 – 65 |
| Insertion Length | 28 mm | 10 – 50 |
| Lead-in Chamfer | 1.2 mm | 0.2 – 3 |
| O-Ring Groove Top Offset | 6.5 mm | 2 – 20 |
| O-Ring Groove Width | 4 mm | 1 – 8 |
| O-Ring Groove Root Diameter | 50.8 mm | 45 – 60 |
| O-Ring Groove Internal Fillet | 0.3 mm | 0 – 0.8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w