Water Drip Tray Above Cabinet (Detailed Installation)

2 views

Bounding box: 260 × 173 × 348 mm
Engine: 3D Printing B-rep
Parameters: 26
Published: November 4, 2026

Download

Free to download and use. See the terms.

The prompt

แบบนี้ ขอแบบละเอียด

Parameters

Name	Value	Range
Tray length L	220 mm	120 – 400
Tray width W	110 mm	80 – 250
Rim upstand height	50 mm	25 – 100
Sheet thickness	2 mm	1.2 – 5
Fall to drain	1.5 %	0.5 – 3
Drain pipe OD	12 mm	8 – 40
Drain centre inset from tray corner	20 mm	10 – 60
Socket projection under the pan	10 mm	6 – 25
Threaded rod diameter	8 mm	4 – 16
Rod length above tray rim	90 mm	40 – 250
Rod inset from tray ends	30 mm	12 – 80
Rod offset outside tray edge	12 mm	6 – 40
Bracket width	22 mm	14 – 40
Cabinet width	140 mm	60 – 300
Cabinet depth	70 mm	40 – 200
Cabinet height	100 mm	40 – 250
Clearance above cabinet	100 mm	50 – 250
Cabinet wall thickness	2.4 mm	1.2 – 5
Ceiling plate thickness	8 mm	3 – 20
Floor foot diameter	26 mm	14 – 50
Floor foot thickness	6 mm	3 – 15
Support height above floor	45 mm	20 – 120
Clamp band width	6 mm	3 – 15
Clamp wall thickness	2.5 mm	1.2 – 5
Strut width	12 mm	8 – 30
Strut thickness	4 mm	2 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS