12.247.214.0
Loading the interactive model…
Interactive 3D model of Water Chamber Top Vertical 3mm Hose Ports

Everything else

Water Chamber Top Vertical 3mm Hose Ports

1 views
Bounding box
47.2 × 12.2 × 14.0 mm
Engine
Precision B-rep
Parameters
17
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Revise ports: two vertical upward barbs on TOP face at X8 and 42, Y7.1, body Z8, barb height6 (tip Z14), OD5.2, bore3.2 through top into cavity, ridge cone 5.2 to6.2 located 4.5mm below tip. Delete side ports entirely. Preserve body 8mm, same 6 point footprint, 1.6 walls/top, 6.4 cavity, 2 support ribs at X18/32 with 5mm bottom opening, open bottom glue face.

Parameters

NameValueRange
Body height8 mm7 – 10
Wall thickness1.6 mm1.2 – 2.2
Top slab thickness1.6 mm1.2 – 2.2
Cavity height6.4 mm5.5 – 8
Support rib thickness1.2 mm0.8 – 1.8
Bottom opening below rib5 mm3 – 5.5
Rib 1 X18 mm10 – 25
Rib 2 X32 mm25 – 40
Barb outer diameter5.2 mm4.5 – 7
Bore diameter3.2 mm3.2 – 4.5
Barb height above top6 mm5 – 8
Retaining ridge diameter6.2 mm5.8 – 6.5
Ridge cone height1 mm0.8 – 1.5
Ridge location below tip4.5 mm3.5 – 5.5
Port 1 X8 mm4 – 12
Port 2 X42 mm38 – 45
Port center Y7.1 mm5 – 9

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Water Chamber Top Vertical 3mm Hose Ports - Free CAD Model (STEP, STL) | TextoCAD