Water Bottle with Push Cap

1 views

Bounding box: 66 × 66 × 211.2 mm
Engine: 3D Printing B-rep
Parameters: 15
Published: October 28, 2026

Download

Free to download and use. See the terms.

The prompt

create a water bottel

Parameters

Name	Value	Range
Body diameter	66 mm	40 – 120
Straight body height	150 mm	80 – 250
Wall thickness	2 mm	1.2 – 5
Base thickness	3 mm	1.5 – 8
Shoulder height	35 mm	10 – 80
Neck outer diameter	26 mm	16 – 45
Neck height	22 mm	10 – 40
Base edge chamfer	3 mm	0.5 – 8
Cap wall thickness	2 mm	1.2 – 5
Cap overall height	22 mm	12 – 40
Cap top thickness	4 mm	1.5 – 8
Sealing plug length	12 mm	3 – 20
Sliding fit clearance per side	0.2 mm	0.1 – 0.5
Grip ribs around the cap	24 mm	0 – 48
Grip rib diameter	1.8 mm	1 – 4

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS