Loading the interactive model…
Interactive 3D model of Watch Movement AssemblyEverything else
Watch Movement Assembly
32 views
- Bounding box
- 36.5 × 25.0 × 6.1 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- August 9, 2026
Download
Free to download and use. See the terms.
The prompt
design a clock mechanism that can fit on a hand watch
Parameters
| Name | Value | Range |
|---|---|---|
| Mainplate Diameter | 25 mm | 20 – 30 |
| Mainplate Thickness | 1 mm | 0.5 – 2 |
| Jewel Hole Diameter | 0.8 mm | 0.4 – 2 |
| Gear Module | 0.5 mm | 0.3 – 1 |
| Center Gear Teeth | 30 | 10 – 60 |
| Third Gear Teeth | 20 | 8 – 40 |
| Fourth Gear Teeth | 12 | 6 – 30 |
| Gear Train Thickness | 2 mm | 1 – 4 |
| Escapement Diameter | 6 mm | 4 – 10 |
| Escapement Teeth | 12 | 6 – 20 |
| Escapement Thickness | 1 mm | 0.5 – 2 |
| Pallet Fork Length | 5 mm | 3 – 8 |
| Pallet Fork Width | 1 mm | 0.5 – 2 |
| Pallet Fork Thickness | 0.5 mm | 0.2 – 1 |
| Balance Wheel Diameter | 8 mm | 6 – 12 |
| Balance Thickness | 1 mm | 0.5 – 2 |
| Balance Rim Width | 1 mm | 0.5 – 2 |
| Dial Diameter | 25 mm | 20 – 30 |
| Dial Thickness | 0.5 mm | 0.2 – 1 |
| Dial Center Hole | 2 mm | 1 – 4 |
| Hour Hand Length | 8 mm | 6 – 12 |
| Hour Hand Base Width | 2 mm | 1 – 3 |
| Hour Hand Thickness | 0.3 mm | 0.1 – 0.5 |
| Hour Hand Angle | 30 deg | 0 – 360 |
| Minute Hand Length | 12 mm | 8 – 15 |
| Minute Hand Base Width | 2 mm | 1 – 3 |
| Minute Hand Thickness | 0.3 mm | 0.1 – 0.5 |
| Minute Hand Angle | 90 deg | 0 – 360 |
| Second Hand Length | 12 mm | 8 – 15 |
| Second Hand Width | 1 mm | 0.5 – 2 |
| Second Hand Thickness | 0.2 mm | 0.1 – 0.4 |
| Second Hand Angle | 180 deg | 0 – 360 |
| Stem Length | 8 mm | 5 – 12 |
| Stem Diameter | 1.5 mm | 1 – 2 |
| Crown Diameter | 4 mm | 3 – 6 |
| Crown Thickness | 2 mm | 1 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS