Brackets and mounts
Waste Segregation Bin
- Bounding box
- 420.1 × 420.0 × 855.1 mm
- Engine
- Precision B-rep
- Parameters
- 43
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
Design a realistic waste segregation bin, cylindrical, in millimeters. BODY: Cylinder 400 mm diameter, 700 mm tall, 3 mm wall. Two perpendicular vertical partition walls through the center split the inside into four equal 90-degree compartments. Flat base plinth 420 mm diameter, 25 mm tall. COMPARTMENTS: Four removable quarter-cylinder buckets, one per quadrant, each with a top handle. Four small hinged doors on the lower front of the body, one per compartment. Color-code the exterior: blue = recyclable, green = wet, red = non-recyclable, grey = mixed. TOP: Domed top cover, 400 mm diameter, 120 mm tall, with a 200 x 150 mm hinged intake lid. Inside the dome, a rectangular detection chamber with a camera mount on the ceiling. A single trap flap forms the chamber floor and is driven by a side-mounted servo. SORTING DISC: Directly under the flap, a flat circular disc 380 mm diameter, 5 mm thick, with one 150 mm wide sector opening and a short angled funnel beneath it. The disc is mounted on a central shaft driven by a stepper motor mounted on the underside of the dome. Keep the model as separate solid bodies: housing, dome, buckets, doors, flap, disc, motor. Use 3 mm fillets on outer edges. Origin at the center of the base.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Outer Diameter | 400 mm | 300 – 600 |
| Housing Height | 700 mm | 400 – 1200 |
| Housing Wall Thickness | 3 mm | 1 – 10 |
| Base Plinth Diameter | 420 mm | 300 – 700 |
| Base Plinth Height | 25 mm | 5 – 50 |
| Partition Wall Thickness | 3 mm | 1 – 10 |
| Outer Edge Fillet Radius | 3 mm | 1 – 10 |
| Dome Diameter | 400 mm | 300 – 600 |
| Dome Height | 120 mm | 50 – 300 |
| Dome Wall Thickness | 3 mm | 1 – 10 |
| Intake Lid Length | 200 mm | 100 – 300 |
| Intake Lid Width | 150 mm | 80 – 250 |
| Intake Lid Thickness | 10 mm | 2 – 20 |
| Bucket Outer Radius | 196 mm | 150 – 250 |
| Bucket Height | 650 mm | 400 – 800 |
| Bucket Handle Length | 30 mm | 10 – 80 |
| Bucket Handle Width | 10 mm | 5 – 30 |
| Bucket Handle Height | 10 mm | 5 – 30 |
| Door Width | 180 mm | 100 – 300 |
| Door Height | 220 mm | 100 – 400 |
| Door Thickness | 5 mm | 2 – 15 |
| Sorting Disc Diameter | 380 mm | 200 – 450 |
| Sorting Disc Thickness | 5 mm | 2 – 20 |
| Sorting Slot Width | 150 mm | 50 – 250 |
| Sorting Slot Length | 190 mm | 50 – 250 |
| Funnel Length | 150 mm | 50 – 250 |
| Funnel Width | 100 mm | 30 – 200 |
| Funnel Thickness | 5 mm | 2 – 20 |
| Funnel Angle | 30 deg | 0 – 60 |
| Stepper Motor Length | 60 mm | 30 – 120 |
| Stepper Motor Width | 60 mm | 30 – 120 |
| Stepper Motor Height | 80 mm | 40 – 150 |
| Central Shaft Diameter | 10 mm | 4 – 30 |
| Central Shaft Length | 120 mm | 50 – 300 |
| Servo Length | 40 mm | 20 – 80 |
| Servo Width | 20 mm | 10 – 60 |
| Servo Height | 40 mm | 20 – 80 |
| Trap Flap Length | 200 mm | 100 – 300 |
| Trap Flap Width | 150 mm | 80 – 250 |
| Trap Flap Thickness | 5 mm | 2 – 20 |
| Camera Mount Width | 30 mm | 10 – 80 |
| Camera Mount Depth | 30 mm | 10 – 80 |
| Camera Mount Height | 20 mm | 10 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu