Gears and transmission
Wash Drone Hexacopter Frame
- Bounding box
- 850.3 × 780.6 × 360.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a hexacopter drone frame for facade inspection and cleaning, called "Wash Drone." Main frame: Central hub, a flat hexagonal plate, 180mm across flats, 4mm thick, carbon-fiber composite. Six arms extend radially from the hub at 60-degree intervals, each arm 260mm long from hub center to motor mount, 20mm wide, 10mm thick, tapering slightly toward the motor end. Motor mounts: At the end of each of the 6 arms, a circular motor mount plate, 28mm diameter, with 4 mounting holes (M3, arranged in a 19mm bolt circle) for 6 brushless motors, 2212-size. Propellers: 6 propellers total, one per motor, 13-inch diameter, mounted directly above each motor. Central body/payload bay: Below the hub, a rectangular enclosure, 130mm x 110mm x 65mm, with a removable bottom hatch for battery access. Mount points inside for a Pixhawk 6C flight controller (36mm x 50mm board) and a Raspberry Pi 5 (85mm x 56mm board), stacked vertically with 15mm clearance between boards. Camera gimbal mount: Front-facing 2-axis gimbal cradle, 40mm diameter circular mount, positioned at the front-bottom of the central body, angled 15 degrees downward from horizontal. Cleaning module: Rear-mounted housing, 90mm x 40mm x 30mm, containing a fluid reservoir (cylindrical, 60mm diameter x 80mm height) and two spray nozzle outlets (6mm diameter) angled 30 degrees downward, spaced 50mm apart. A flexible tether line outlet at the base of the body, 8mm diameter port, for a hose/tether connection running down from the payload bay. Landing gear: Four fixed skid legs, each 10mm diameter carbon rod, bent at a 90-degree angle, providing 90mm ground clearance, mounted at alternating arm bases. Battery bay: Slide-in tray for a 6S LiPo battery, 145mm x 51mm x 45mm envelope, secured with a velcro strap channel. Overall motor-to-motor diagonal span: 620mm (hexacopter, opposing arms). Total design should be lightweight, optimized for a 4.5-5kg MTOW to account for 6-motor redundancy and cleaning payload, with mounting holes and clearances suitable for 3D printing in PETG or carbon-nylon composite. All dimensions in millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Hub Across Flats | 180 mm | 100 – 300 |
| Hub Thickness | 4 mm | 2 – 10 |
| Arm Length | 260 mm | 180 – 350 |
| Arm Base Width | 20 mm | 12 – 30 |
| Arm Tip Width | 14 mm | 8 – 25 |
| Arm Thickness | 10 mm | 4 – 15 |
| Propeller Diameter | 330.2 mm | 200 – 381 |
| Propeller Thickness | 2 mm | 1 – 5 |
| Motor Mount Diameter | 28 mm | 20 – 35 |
| Motor Mount Thickness | 3 mm | 2 – 6 |
| Bolt Circle Diameter | 19 mm | 14 – 25 |
| Bolt Hole Diameter | 3.2 mm | 2 – 4 |
| Payload Bay Length | 130 mm | 100 – 160 |
| Payload Bay Width | 110 mm | 80 – 140 |
| Payload Bay Height | 65 mm | 40 – 80 |
| Camera Mount Diameter | 40 mm | 20 – 60 |
| Camera Tilt Angle | 15 deg | 0 – 30 |
| Cleaning Housing Depth | 30 mm | 15 – 50 |
| Cleaning Housing Height | 90 mm | 60 – 120 |
| Reservoir Diameter | 60 mm | 40 – 80 |
| Nozzle Downward Angle | 30 deg | 15 – 45 |
| Nozzle Spacing | 50 mm | 30 – 70 |
| Landing Gear Rod Dia. | 10 mm | 6 – 14 |
| Leg Vertical Length | 90 mm | 60 – 120 |
| Leg Horizontal Skid | 30 mm | 15 – 50 |
| Battery Tray Length | 145 mm | 120 – 160 |
| Battery Tray Width | 51 mm | 40 – 60 |
| Battery Tray Height | 45 mm | 30 – 55 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled