Everything else
Wardrobe Assembly 5250+2000
- Bounding box
- 2000.0 × 2700.0 × 453.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
# ==================================================================================== # 【全屋定制 CAD 立面几何施工图 - 自动生成脚本文件 (.scr / .lsp 兼容)】 # 适用单位：毫米 (mm) | 比例: 1:1 | 行业制图规范分层: 柜体线、分格线、核心标注线 # ==================================================================================== # 1. 初始化系统环境变量与图层新建 -LAYER N "01_柜体外轮廓" C 7 "01_柜体外轮廓" N "02_内部五金结构" C 4 "02_内部五金结构" N "03_活动木层板" C 2 "03_活动木层板" N "04_垂直灯带槽" C 1 "04_垂直灯带槽" N "05_尺寸标注" C 3 "05_尺寸标注" # ==================================================================================== # 【区域 1 几何绘制数据】 (总宽 5250, 高 2700, 深 450) # ==================================================================================== CLAYER "01_柜体外轮廓" RECTANG 0,0 5250,2700 # 顶储物地平线 LINE 0,2300 5250,2300 # 地板踢脚线 LINE 0,45 5250,45 # 内部柜体垂直分格中轴线 LINE 600,45 600,2300 LINE 1200,45 1200,2300 LINE 1800,45 1800,2300 LINE 2700,45 2700,2300 # 【红色扩大成长衣区】：移除原 2700 到 4900 之间的旧绿色层板隔断，合并形成 1250mm 超宽长衣通 LINE 3950,45 3950,2300 LINE 4300,45 4300,2300 LINE 4900,45 4900,2300 # 细节局部细节结构 CLAYER "02_内部五金结构" # 区域1红色长衣挂衣杆位置绘制 (Y轴定位) CIRCLE 3325,2200 15 LINE 2710,2200 3940,2200 # 区域1右下角橘黄色改动挂衣区 (保留上方开放层板，在层板下置挂衣杆) LINE 3950,600 4300,600 ; 保留的开放式横向木层板 CIRCLE 4125,520 15 ; 新增 Brush 挂衣杆中心点 LINE 3960,520 4290,520 ; 挂衣杆轴线 # ==================================================================================== # 【区域 2 几何绘制数据】 (总宽 2000, 高 2700, 深 450) # ==================================================================================== CLAYER "01_柜体外轮廓" # 区域2初始点定在 X=6000 偏移区，防图纸重叠 RECTANG 6000,0 8000,2700 LINE 6000,2300 8000,2300 LINE 6000,45 8000,45 # 左右两组大面宽中轴线划分 (各宽 600mm) LINE 6600,45 6600,2300 LINE 7200,45 7200,2300 CLAYER "04_垂直灯带槽" # 侧板原垂直线性灯带工艺槽 (加粗线定位指示) PLINE 6010,45 6010,2300 W 3 3 PLINE 6590,45 6590,2300 W 3 3 PLINE 6610,45 6610,2300 W 3 3 PLINE 7190,45 7190,2300 W 3 3 CLAYER "03_活动木层板" # 紫色区域与蓝色区域分别改做 5 层活动层板，以下为工厂初始组装均分线 (高度位置: 416, 787, 1158, 1529, 1900) # 紫色区五层活动层板 LINE 6015,416 6585,416 LINE 6015,787 6585,787 LINE 6015,1158 6585,1158 LINE 6015,1529 6585,1529 LINE 6015,1900 6585,1900 # 蓝色区五层活动层板 LINE 6615,416 7185,416 LINE 6615,787 7185,787 LINE 6615,1158 7185,1158 LINE 6615,1529 7185,1529 LINE 6615,1900 7185,1900 # ==================================================================================== # 【自动尺寸智能标注命令】 # ==================================================================================== CLAYER "05_尺寸标注" DIMLINEAR 0,0 5250,0 0,-150 ; 区域1底总宽标注 DIMLINEAR 0,0 0,2700 -200,0 ; 总高度标注 DIMLINEAR 6000,0 8000,0 6000,-150 ; 区域2底总宽标注 # 脚本绘制指令结束标记 ZOOM E
Parameters
| Name | Value | Range |
|---|---|---|
| Board Thickness | 18 mm | 12 – 30 |
| Left Cabinet Width | 5250 mm | 1000 – 8000 |
| Right Cabinet Width | 2000 mm | 600 – 4000 |
| Cabinet Height | 2700 mm | 1000 – 3500 |
| Cabinet Depth | 450 mm | 250 – 700 |
| Right Cabinet X Offset | 6000 mm | 5000 – 9000 |
| Top Storage Line Height | 2300 mm | 1500 – 2690 |
| Kickboard Height | 45 mm | 20 – 150 |
| Hanging Rod Diameter | 30 mm | 15 – 50 |
| Long Rod Length | 1230 mm | 300 – 3000 |
| Long Rod Start X | 2710 mm | 0 – 5200 |
| Long Rod Height | 2200 mm | 500 – 2650 |
| Lower Rod Length | 330 mm | 100 – 1200 |
| Lower Rod Start X | 3960 mm | 0 – 5200 |
| Lower Rod Height | 520 mm | 100 – 2000 |
| Open Shelf Start X | 3950 mm | 0 – 5200 |
| Open Shelf Width | 350 mm | 150 – 1200 |
| Open Shelf Height | 600 mm | 100 – 2200 |
| Adjustable Shelf Width | 570 mm | 200 – 700 |
| Shelves per Column | 5 pcs | 1 – 8 |
| First Shelf Height | 416 mm | 100 – 2000 |
| Shelf Spacing | 371 mm | 150 – 600 |
| LED Strip Width | 3 mm | 1 – 20 |
| LED Strip Length | 2255 mm | 500 – 2650 |
| LED Strip Depth | 12 mm | 3 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm