Brackets and mounts
Wall-Mounted Tape Bracket
- Bounding box
- 75.0 × 78.3 × 90.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a single, wall-mounted bracket for holding one roll of technical tape (like Kapton tape with a 1-inch core). The design must consist of two main components: 1. A single-piece wall mount: - A vertical backplate (thickness: 6mm, height: 90mm, width: 35mm) with two countersunk screw holes (4.5mm diameter) for wall mounting. - Two rigid cantilever arms extending 65mm forward from the backplate. - Each arm must have a U-shaped drop-in slot (width: 16mm, depth: 20mm) at the front end to hold the spindle. 2. A removable spindle (core): - A central cylinder with an outer diameter of 24.5mm (to easily fit a standard 25.4mm / 1-inch tape core) and a width of 30mm. - Two end-axles (journals) with a reduced diameter of 15mm and a length of 8mm on each side, designed to drop perfectly into the U-shaped slots of the bracket. The entire design should be optimized for 3D printing without supports when oriented flat on its side. Output as a clean parametric CAD file (STEP or STL).
Parameters
| Name | Value | Range |
|---|---|---|
| Backplate Width | 35 mm | 30 – 50 |
| Backplate Height | 90 mm | 60 – 120 |
| Backplate Thickness | 6 mm | 4 – 10 |
| Arm Inner Spacing | 35 mm | 20 – 60 |
| Arm Width (X) | 20 mm | 16 – 30 |
| Arm Height (Z) | 30 mm | 20 – 50 |
| Arm Length (Y) | 65 mm | 40 – 100 |
| Slot Width | 16 mm | 10 – 30 |
| Slot Depth (Y) | 10 mm | 8 – 20 |
| Spindle Center Height | 45 mm | 30 – 80 |
| Axle Diameter | 15 mm | 10 – 25 |
| Central Cylinder OD | 24.5 mm | 20 – 30 |
| Central Cylinder Width | 30 mm | 20 – 40 |
| Axle Length | 8 mm | 5 – 15 |
| Mounting Hole Dia | 4.5 mm | 3 – 6 |
| Countersink Outer Dia | 8 mm | 6 – 12 |
| Countersink Depth | 2 mm | 1 – 4 |
| Hole Vertical Spacing | 45 mm | 30 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu