Brackets and mounts
Wall-Mounted Soap Dispenser (Simplified Single Solid)
- Bounding box
- 101.0 × 82.0 × 250.0 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- August 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete parametric, manufacturable 3D CAD model of the attached wall-mounted liquid soap dispenser. Match the reference image: vertical cylindrical metallic-gold body, chrome top/bottom trim rings, rear wall-mounting plate, recessed front silver/gray vertical insert, small oval insert, and lower projecting translucent push button. Model the dispenser as a **multi-part assembly**, not one fused solid. Use approximately 250 mm height, 78 mm body diameter, and 2.5–3 mm housing wall thickness, with editable parameters. Create separate CAD parts for: main cylindrical housing, removable upper cover with bayonet/threaded lock, chrome trim rings, translucent soap reservoir, reservoir neck, dip tube, pump cylinder, piston/plunger, piston O-ring, compression spring, inlet/outlet check valves, valve seats, outlet passage/nozzle, push button, actuator, button guides, lower housing, rear mounting plate, internal bracket, front inserts, screws, O-rings, clips and retaining components. Model a functional pump mechanism: soap flows **reservoir → dip tube → inlet valve → pump chamber → outlet valve → nozzle**. The push button must move linearly inward, compress the piston return spring, displace the piston, and dispense soap. Use an actual helical compression spring and realistic seals. Provide realistic clearances (approximately 0.2–0.4 mm for sliding parts), locating bosses, ribs, retaining lips, fasteners, and assembly interfaces. Create rest and pressed configurations, plus a fully assembled view, exploded view, sectional view showing internal mechanisms, and BOM. Apply realistic materials: gold housing, chrome trim, translucent reservoir/button, plastic internals, stainless-steel spring, silicone/EPDM seals. Ensure every major component is separately editable, manufacturable, serviceable, and assembles without interference.
Parameters
| Name | Value | Range |
|---|---|---|
| Body outer diameter | 78 mm | 50 – 150 |
| Body overall height | 250 mm | 150 – 400 |
| Housing wall thickness | 3 mm | 1.5 – 6 |
| Bottom trim outer diameter | 78 mm | 50 – 160 |
| Bottom trim height | 12 mm | 4 – 30 |
| Top trim height | 12 mm | 4 – 30 |
| Reservoir outer diameter | 66 mm | 40 – 100 |
| Reservoir cavity height | 185 mm | 80 – 300 |
| Reservoir wall thickness | 2 mm | 1 – 5 |
| Pump chamber diameter | 16 mm | 8 – 30 |
| Pump chamber depth | 35 mm | 15 – 70 |
| Pump chamber center height | 50 mm | 20 – 150 |
| Dip tube passage diameter | 6 mm | 3 – 12 |
| Dip tube passage length | 40 mm | 20 – 80 |
| Nozzle bore diameter | 6 mm | 3 – 12 |
| Nozzle projection length | 12 mm | 5 – 30 |
| Push button width | 32 mm | 20 – 60 |
| Push button height | 28 mm | 15 – 60 |
| Push button outward projection | 18 mm | 6 – 40 |
| Push button center height | 80 mm | 40 – 150 |
| Front vertical insert width | 30 mm | 15 – 60 |
| Front vertical insert height | 110 mm | 50 – 200 |
| Front vertical insert pocket depth | 1.2 mm | 0.3 – 3 |
| Front vertical insert center height | 155 mm | 80 – 220 |
| Small oval insert width | 14 mm | 6 – 30 |
| Small oval insert height | 22 mm | 8 – 50 |
| Small oval pocket depth | 1 mm | 0.2 – 3 |
| Small oval center height | 215 mm | 160 – 240 |
| Rear mounting plate width | 70 mm | 40 – 120 |
| Rear mounting plate height | 190 mm | 100 – 300 |
| Rear mounting plate thickness | 5 mm | 3 – 10 |
| Rear mounting plate bottom height | 30 mm | 0 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent