Brackets and mounts
Wall-Mounted Plastic Monoblock Cooling Housing
- Bounding box
- 572.0 × 212.0 × 872.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a professional engineering technical drawing on A4 paper format. Drawing type: Orthographic front view of a wall-mounted plastic monoblock cooling housing. Purpose: Technical patent documentation drawing. The result must look like an engineering drawing, not a 3D render or advertising image. Object: A wall-mounted cooling monoblock housing made entirely from plastic. Main dimensions: - Height: 860 mm - Width: 560 mm Housing design: - Rectangular plastic enclosure. - Rounded external corners. - Plastic molded body. - NOT a metal housing. - Clean modern industrial design. Front view elements: 1. Front plastic cover panel. 2. Front ventilation louvers located in the lower area of the front panel. 3. Side-mounted control display module. Control panel: - The control panel must NOT be located in the center. - Place the control panel on the right side of the front panel. - Position: right upper or right side area of the front surface. - The control panel is a thin flat electronic display module. - The display is installed inside a recessed plastic pocket. - No central control block. - No large electronic module in the middle of the housing. Air system: - Show ventilation louvers for air outlet. - Do not show any external water drainage. - Do not show a drain pipe. - Do not show condensate outlet holes. - The housing must have no visible external condensate drainage system. Technical drawing requirements: - A4 sheet format. - One separate drawing only. - Black and white engineering line drawing. - Thin technical lines. - Orthographic projection only. - Front view only. - Include dimension lines showing: - 860 mm overall height. - 560 mm overall width. - No perspective view. - No realistic rendering. - No colors. - No shadows. - No decorative elements. Title on drawing: "Plastic wall-mounted monoblock cooling housing – Front view" The final image must look like a professional mechanical engineering patent drawing.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall height | 860 mm | 600 – 1200 |
| Overall width | 560 mm | 400 – 1000 |
| Overall depth | 200 mm | 100 – 400 |
| Wall thickness | 6 mm | 3 – 15 |
| External corner radius | 4 mm | 1 – 10 |
| Number of louvers | 5 | 1 – 10 |
| Louver slot width (horizontal) | 480 mm | 200 – 560 |
| Louver slot height (vertical) | 10 mm | 5 – 30 |
| Spacing between louvers | 25 mm | 10 – 60 |
| First louver offset from bottom | 100 mm | 20 – 300 |
| Control panel pocket width | 150 mm | 50 – 300 |
| Control panel pocket height | 100 mm | 50 – 250 |
| Control panel pocket depth | 5 mm | 2 – 15 |
| Pocket center X offset from right edge | 100 mm | 50 – 250 |
| Pocket center Z offset from top edge | 80 mm | 30 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent