Brackets and mounts
Wall-Mounted Dip Bar Assembly
- Bounding box
- 700.0 × 700.0 × 650.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D CAD model of a wall-mounted wooden parallel dip bars assembly with a steel pipe handle. The design consists of two symmetrical wall bracket units spaced 600mm apart, connected by a single round pipe. Component Details and Dimensions: 1. Vertical Wall Mounts (2x): Rectangular wooden beams, cross-section 50mm x 100mm, length 700mm. Positioned flat against the wall. Include three 10mm through-holes along the centerline for wall anchors. 2. Horizontal Cantilever Beams (2x): Rectangular wooden beams, cross-section 50mm x 100mm, length 600mm. Mounted "on-edge" (100mm dimension oriented vertically) perpendicular to the top of the vertical mounts at a 90-degree angle. 3. Diagonal Braces / Struts (2x): Wooden support beams, cross-section 50mm x 50mm, positioned at a 45-degree angle, connecting the lower part of the vertical mount to the middle of the horizontal beam. 4. Handle Pipe: A round cylindrical tube, Outer Diameter (OD) = 50mm, total length 700mm. Joinery and Features: - Near the free end of each horizontal beam, include a 50mm diameter bored through-hole to tightly receive the handle pipe. The pipe passes through both horizontal beams, extending slightly past the outer edges. - All wooden joints are flush and secured. Include 10mm clearance holes at the intersections of the beams and diagonal braces for bolt fasteners. - Apply a small 2mm fillet to all exposed outer wooden edges for safety. Output the final assembly as a clean, manifold solid geometry suitable for STEP/IGES export.
Parameters
| Name | Value | Range |
|---|---|---|
| Vertical Mount Width (X) | 100 mm | 40 – 200 |
| Vertical Mount Depth (Z) | 50 mm | 20 – 150 |
| Vertical Mount Height (Y) | 700 mm | 200 – 1500 |
| Horizontal Beam Width (X) | 50 mm | 20 – 100 |
| Horizontal Beam Height (Y) | 100 mm | 30 – 200 |
| Horizontal Beam Length (Z) | 600 mm | 100 – 1200 |
| Diagonal Brace Cross‑Section | 50 mm | 20 – 100 |
| Handle Outer Diameter | 50 mm | 20 – 100 |
| Handle Length | 700 mm | 200 – 1500 |
| Pipe Wall Thickness | 3 mm | 1 – 10 |
| Center‑to‑Center Spacing | 600 mm | 200 – 1200 |
| Bolt Hole Diameter | 10 mm | 4 – 20 |
| Fillet Radius | 2 mm | 0 – 10 |
| Wall Anchor Holes per Mount | 3 | 2 – 5 |
| Brace Lower Attachment Y | 300 mm | 100 – 500 |
| Brace Upper Attachment Z | 350 mm | 100 – 600 |
| Handle Hole Offset from Free End | 50 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu