Brackets and mounts
Wall-Mounted Cooling Housing
- Bounding box
- 560.0 × 860.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a technical patent-style drawing on A4 sheet format. Drawing type: 2D engineering drawing, front view only. Object: Wall-mounted plastic monoblock cooling housing. Main dimensions: Height: 860 mm. Width: 560 mm. Housing: - Rectangular plastic enclosure. - Material: plastic, not metal. - Rounded external corners. - Smooth plastic front surface. - Wall-mounted construction. - Show the complete external contour of the housing. Front panel elements: - Front ventilation louvers located on the front surface. - Louvers integrated into the plastic housing design. - No central control block. - No control unit in the middle area. Control panel: - Flat electronic display module. - Located on the lower right side of the front panel. - Installed inside a recessed plastic pocket. - Small compact module integrated into the housing. - The central front area must remain free. Drawing requirements: - A4 paper format. - Technical drawing style. - Black and white line drawing. - Clear contour lines. - Engineering documentation appearance. - Show only the front view. - Add only overall dimensions: Height = 860 mm. Width = 560 mm. - Do not add unnecessary details. - Do not create a 3D render. - Do not use metallic appearance. - Create a clean patent drawing style.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 860 mm | 200 – 2000 |
| Overall Width | 560 mm | 200 – 2000 |
| Depth | 80 mm | 20 – 200 |
| Corner Radius | 25 mm | 0 – 50 |
| Louver Count | 10 | 0 – 30 |
| Slot Height | 10 mm | 2 – 30 |
| Slot Length | 480 mm | 50 – 550 |
| Vertical Spacing | 60 mm | 10 – 100 |
| Start from Bottom | 100 mm | 10 – 800 |
| Pocket Width | 80 mm | 20 – 200 |
| Pocket Height | 60 mm | 20 – 200 |
| Pocket Recess Depth | 5 mm | 1 – 20 |
| Offset from Right | 30 mm | 0 – 200 |
| Offset from Bottom | 50 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent