Brackets and mounts
Wall-Mounted Bench with Drawer
- Bounding box
- 2080.0 × 502.5 × 830.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Bench with wooden frame. 200 cm long, seat hight 48 cm, seat depth 45 cm. placed against and mounted to wall with a cushion seating and backing. over the full length there needs to be an drawer that rolls out of the right side to put in equipment. This space needs to hold equipment with dimensions 35 high and 35 wide. the structure of the bench needs to hold 500 kilograms in total, the drawer needs to hold about 100 kilos in total. Make sure there's room for wheels on the bottom of the drawer and wooden guides on the inside of the bench to keep the drawer aligned
Parameters
| Name | Value | Range |
|---|---|---|
| Bench Length | 2000 mm | 1500 – 3000 |
| Bench Depth | 450 mm | 400 – 600 |
| Seat Height (floor to top of cushion) | 480 mm | 420 – 600 |
| Seat Cushion Thickness | 40 mm | 30 – 100 |
| Back Panel Height | 350 mm | 200 – 500 |
| Back Cushion Thickness | 50 mm | 30 – 100 |
| Frame Panel Thickness | 20 mm | 10 – 40 |
| Drawer Outer Width (perpendicular to pull) | 380 mm | 300 – 500 |
| Drawer Outer Depth (pull direction) | 400 mm | 300 – 600 |
| Drawer Outer Height | 360 mm | 300 – 500 |
| Equipment Inside Width | 350 mm | 200 – 450 |
| Equipment Inside Height | 350 mm | 200 – 450 |
| Caster Wheel Diameter | 50 mm | 30 – 80 |
| Drawer Guide Width | 20 mm | 10 – 30 |
| Drawer Guide Thickness | 10 mm | 5 – 20 |
| Wall Bracket Leg Length | 100 mm | 50 – 150 |
| Wall Bracket Thickness | 5 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent